Harbor Freight Tools 92801 INSPECTION, MAINTENANCE, and Cleaning, Do not use damaged equipment

Page 9

INSPECTION, MAINTENANCE, AND CLEANING

1.WARNING! Always turn the Power Switch (11) to its “OFF” position, and remove the Batteries from the tool before performing any inspection, mainte- nance, or cleaning.

2.Before each use: Inspect the general condition of the Laser Level. Check for misalignment or binding of moving parts, cracked or broken parts, leaking Batter- ies, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.

Do not use damaged equipment.

3.Daily: With a clean cloth, remove all dirt, grease, and oil from the Laser Level. Do not immerse the Laser Level in any liquids.

4.WARNING! All maintenance, service, or repairs not listed in this manual are only to be attempted by a qualified service technician.

NOTE: NO REPLACEMENT PARTS ARE AVAILABLE FOR THIS PRODUCT.

SKU 92801

For technical questions, please call 1-800-444-3353.

Page 9

Image 9
Contents For technical questions, please call Rotary Laser Level KITGeneral Safety Rules Product SpecificationsUnpacking Save this ManualPersonal Safety Tool USE and Care ServiceSpecific Safety Rules Industrial applications must follow Osha requirements Assembly InstructionsSee Figure a Rear ViewRight Side View Figure BSee Figures B and C Operating InstructionsDo not use damaged equipment INSPECTION, MAINTENANCE, and Cleaning