SPECIFIC SAFETY RULES
1.
WARNING! Laser light can harm the eye. Do not look directly into this Laser Level, or the reflection of the light. Do not allow any other person or animal to be exposed to the direct or reflected laser beam. If necessary, wear protective laser goggles (not included) appropriate for this laser type to protect yourself and others from harmful laser beams.
2.Make sure the laser beam is aimed at a sturdy object without reflective surfaces. Reflective surfaces are not suitable for laser applications, as the reflec- tive surface may direct the laser beam back at the operator, causing potential eye damage.
3.Do not attempt to alter the laser light or replace it with a different type. Doing so may result in hazardous radiation exposure. Only qualified and trained em- ployees must be assigned to install, adjust, and operate laser equipment.
4.Never leave the Laser Level unattended when it is turned on. Make sure to turn off the tool before leaving the work area.
5.Do not use the Laser Level if it has been dropped, damaged, or immersed in liquid.
6.This Laser Level features a variable rotation speed of 0 to 600 RPM. Higher rotation speeds allow the operator to see the laser beam at greater distances outdoors. However, higher rotation speeds make the laser beam less detectable when the Laser Level is used indoors. Typically, the slower the rotation speed the brighter the laser beam appears. The exact speed at which that happens de- pends on the individual and will require dialing the rotation speed to best match your own eyes.
7.Take care not to accidentally bump or move the Laser Level and its Tripod after they have been set up and leveled. If the Laser Level is accidentally bumped or moved you must
8.Maintain labels and nameplates on the Laser Level. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replace- ment.
9.Always turn off the Laser Level and remove its Batteries before changing
SKU 92801 | For technical questions, please call | Page 5 |