How to Put Your Ceiling Fan Together

1.Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 1). Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in step 5.

HANGER

BALL

3.Tighten the two upper setscrews (Figure 2) securely while pulling up on the downrod.

NOTE: The setscrews must be properly installed as described above, or fan wobble could result.

4.Place the ceiling cover over the downrod, making sure that the large opening faces upward (Figure 3).

DOWNROD	SETSCREW

Figure 1

2. Unscrew the two upper setscrews (Figure 2) until

they clear the inside of the motor coupling. Then

separate, untwist and unkink the three 80” motor

leads. Route the motor lead wires through the

downrod. Align the clevis pin holes in the downrod

with the holes in the motor coupling. Install the

DOWNROD

RETIGHTEN

UPPER

SETSCREW

Figure 3

CEILING

COVER

RETIGHTEN UPPER SETSCREW

clevis pin and secure with the hairpin clip (Figure

2). The clevis pin must go through the holes in the

motor coupling and the holes in the downrod. Be

sure to push the straight leg of the hairpin clip

through the hole near the end of the clevis pin until

the curved portion of the hairpin clip snaps around

the clevis pin. The hairpin clip must be properly

installed to prevent the clevis pin from working

loose. Pull on the downrod to make sure the clevis

pin is properly installed.

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrews are securely tightened. Failure to verify that the pin and setscrews are properly installed (as shown in Figures 2 & 3) could result in the fan falling.

5.Reinstall the hanger ball on the downrod as follows (Figure 4) . Route the three 80” motor leads through the hanger ball. Position the pin through the two holes in the downrod and align the hanger ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the setscrew in the hanger ball. A loose setscrew could create fan wobble.

!WARNING

It is critical that the pin in the hanger ball is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are proper- ly installed could result in the fan falling.

		MOTOR
	DOWNROD	COUPLING
	UPPER
	SETSCREW (2)	HAIRPIN
	CLEVIS PIN	HAIRPIN
	CLEVIS PIN	CLIP

CLEVIS PIN

UNTIGHTEN

UPPER

SETSCREW

Figure 2

DOWNROD

CLEVIS PIN

HAIRPIN

CLIP

UNTIGHTEN

UPPER

SETSCREW

	PIN
HANGER BALL
DOWNROD	CEILING
	COVER
	SETSCREW

Figure 4

6.The fan comes with blue, black and white leads that are 80-inches long. Before installing the fan, measure up approximately 6 to 9-inches above top of hanger ball/downrod assembly. Cut off excess leads and strip back insulation 1/2-inch from end of leads.

CF654ORB00, CF654AW00, CF654WB00, CF654WW00, CF654OB00 specifications

The Emerson CF654 series ceiling fans, including the CF654ORB00, CF654WB00, CF654AW00, and CF654WW00, are designed to enhance both comfort and aesthetic appeal in a variety of indoor spaces. Each model boasts a thoughtfully crafted design that blends modern elegance with functional efficiency.

One of the primary features of the CF654 series is its Quiet Motor Technology. This innovation ensures minimal noise while operating, making these fans ideal for use in bedrooms, living rooms, or any area where serenity is a priority. The fans are equipped with the Emerson direct-drive motor, known for its reliability and longevity, offering robust air movement without the clatter associated with traditional ceiling fans.

Another standout characteristic is the aesthetic versatility. The models in this series come in several stylish finishes—Oil-Rubbed Bronze (CF654ORB00), White (CF654WB00), Antique White (CF654AW00), and Walnut (CF654WW00). This variety allows homeowners to select a fan that harmonizes with their existing décor, whether it’s modern, rustic, or traditional.

Additionally, the CF654 series offers impressive airflow efficiency, making them suitable for both warm and cooler climates. With a blade span of 52 inches, these fans are optimal for medium to large rooms. They can effectively circulate air, potentially reducing reliance on air conditioning and helping to create a comfortable space with lower energy costs.

The airflow can be adjusted through three speed settings, allowing users to customize their experience based on the season or personal preference. This ensures that whether it's a hot summer day or a frigid winter evening, the fan operates effectively throughout the year.

Installation is simplified with a comprehensive mounting system, allowing for both standard and angled ceiling mounting. The included instructions make setup manageable for DIY enthusiasts, while the sleek design maintains an unobtrusive profile.

In conclusion, the Emerson CF654 series ceiling fans combine advanced technology, versatile design, and user-friendly features, making them a great choice for enhancing comfort and style in any home. With options to suit various interior aesthetics and robust performance capabilities, these fans stand out as a reliable home improvement investment.