Harbor Freight Tools 90980 Heart pacemaker could cause interference or failure, Pacemaker, Seq

Warning: Always make certain the laser is off before adjusting or changing batteries.

Installing and Removing Batteries

1.The Laser Level uses two (2) “AAA” batteries. Remove the Battery Cover (13)

located under the On/Off Button (9) -see Figure 5. Remove the old batteries and insert two new batteries. Line the batteries up the same way, so that positive and negative ends match the diagram on the end of the Laser Level. Replace the Battery Cover (13).

Warning:	People with pacemakers should consult with their physician before
	using this product; operation of equipment in close proximity to a
	heart pacemaker could cause interference or failure of the
	pacemaker.
Warning:	This product contains or produces a chemical known to the State
	of California to cause cancer and birth defects (or other
	reproductive harm). (California Health & Safety Code 25249.5 et
	seq.)
	Unpacking

When unpacking your 16" Laser Level with 360° Rotating Leveling Head, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353.

		Parts List
Part #	Description	Quantity				Part #			Description		Quantity
1	Laser Aperture	1			10				Front Cover		1
2	Back Cover	1			11				Lens Fixture		1
3	Vertical Bubble	1			12				Fan Lens		1
4	Horizontal Bubble	1			13				Battery Cover		1
5	Plastic Body	1			14				Knob		1
6	Laser Modules	1			15				Tripod		3
7	Rotating Head	1			16				Adjusting Knob		3
8	Battery Spring	1			17				Knob		1
9	On/Off Button	1			18				Handle		1
					19				Bulls-Eye Bubble		2
		Assembly/Parts Diagram
											19
			3	4	5		6	8	13
		2							9
	18
	15	14								11
									1
		16					12
									10
								7
	17

Note: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.

SKU 90980 Page 5