How to Wire Your Ceiling Fan

If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.

!WARNING

To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. NOTE: If you are not sure if the outlet box is ground- ed, contact a licensed electrician for advice, as it must be grounded for safe operation.

1.Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation).

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

3.	Screw the two threaded studs (supplied) into the
	tapped holes in the hanger bracket.
4.	Lift the ceiling cover up to the threaded studs and
	turn until studs protrude through the holes in the
	ceiling cover (Figure 11).
5.	Secure the ceiling cover in place by sliding lockwash-
	ers over the threaded studs and installing the two
	knurled knobs (supplied). (Figure 11). Tighten the

GROUND WIRE

BLACK AND BLUE FAN WIRES

NOTE: CEILING COVER OMITTED FOR CLARITY.

knurled knobs securely until the ceiling cover fits

snugly against the ceiling and the hole in the ceiling

cover is clear of the downrod. Your fan is now wired to

be turned on and off from the fan switch.

WIRE CONNECTORS (3)

GREEN WIRE (GROUND)

FROM FAN

Figure 10

WHITE SUPPLY (NEUTRAL)

WHITE FAN

WIRE

BLACK SUPPLY (HOT)

CEILING COVER

LOCKWASHERS (2) THREADED STUD

KNURLED KNOB

Figure 11

NOTE: If you are using an Emerson light fixture with your fan, remove the three screws securing the switch housing cover to the switch housing and remove the cover. Remove the screw plug from the bottom of the switch housing cover and install the light in accordance with the light kit Owner's Manual.

2.Connect the fan motor white wire to the supply white (neutral) wire using a wire connector (supplied) (Figure 10). Connect the fan motor black wire and blue wire to the supply black (hot) wire using a wire connector (supplied) (Figure 10). Your fan is now wired to be turned on and off from the fan switch. After connections have been made, turn leads upward and carefully push leads into the out- let box, with the white and green leads on one side of the outlet box and the black and blue leads on the other side of the outlet box.

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

6.Cut the 3-speed switch pull chain to a desired length (optional). Connect the wood pendant (supplied) to the 3-speed switch pull chain by sliding the wooden pendant (small hole first) onto the pull chain. Attach the chain coupler to the end of the chain and allow the wooden pendant to fall down over the coupling.

U.L. Model No.: CF654

CF654ORB00, CF654AW00, CF654WB00, CF654WW00 specifications

The Emerson CF654 series ceiling fans, including the CF654ORB00, CF654WB00, CF654AW00, and CF654WW00, are designed to enhance both comfort and aesthetic appeal in a variety of indoor spaces. Each model boasts a thoughtfully crafted design that blends modern elegance with functional efficiency.

One of the primary features of the CF654 series is its Quiet Motor Technology. This innovation ensures minimal noise while operating, making these fans ideal for use in bedrooms, living rooms, or any area where serenity is a priority. The fans are equipped with the Emerson direct-drive motor, known for its reliability and longevity, offering robust air movement without the clatter associated with traditional ceiling fans.

Another standout characteristic is the aesthetic versatility. The models in this series come in several stylish finishes—Oil-Rubbed Bronze (CF654ORB00), White (CF654WB00), Antique White (CF654AW00), and Walnut (CF654WW00). This variety allows homeowners to select a fan that harmonizes with their existing décor, whether it’s modern, rustic, or traditional.

Additionally, the CF654 series offers impressive airflow efficiency, making them suitable for both warm and cooler climates. With a blade span of 52 inches, these fans are optimal for medium to large rooms. They can effectively circulate air, potentially reducing reliance on air conditioning and helping to create a comfortable space with lower energy costs.

The airflow can be adjusted through three speed settings, allowing users to customize their experience based on the season or personal preference. This ensures that whether it's a hot summer day or a frigid winter evening, the fan operates effectively throughout the year.

Installation is simplified with a comprehensive mounting system, allowing for both standard and angled ceiling mounting. The included instructions make setup manageable for DIY enthusiasts, while the sleek design maintains an unobtrusive profile.

In conclusion, the Emerson CF654 series ceiling fans combine advanced technology, versatile design, and user-friendly features, making them a great choice for enhancing comfort and style in any home. With options to suit various interior aesthetics and robust performance capabilities, these fans stand out as a reliable home improvement investment.