BullseyeTM Laser Level /
Stud - Metal - AC Wiring Sensor
INSTRUCTION MANUAL
Catalog No. BDL110S
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-54-HOW-TO (544-6986)
IF YOU SHOULD EXPERIENCE A PROBLEM
WITH YOUR BLACK & DECKER PRODUCT,
CALL 1-800-54-HOW-TO (544-6986)
BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No., TYPE No., AND DATE CODE (e.g. 20000130M). IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU HAVE ASUGGESTION OR COMMENT, GIVE US ACALL. YOUR FEEDBACK IS VITALTO BLACK & DECKER.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Cat No. BDL110S Form #
1 | FEATURES |
| 1.) Marking/Hanging Insert |
| 2.) Detector Button |
| 3.) Laser On/Off Button |
| 4.) Metal Position |
| 5.) Stud Position |
| 6.) Slide Switch |
| 7.) AC Wire Indicator LED |
| 8.) Red LED’s (Light |
| Emitting Diodes) |
| 9.) Green LED |
| 10.) |
| Lines |
| 11.) Battery Compartment |
| Cover |
| 12.) Hanging Insert (keyhole) |
| 13.) Spacer Insert |
| 14.) Drywall Pin |
2 | 3 |
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Safety Instructions
• | Do not operate the laser in explosive atmospheres, such as in the presence of flammable |
| liquids, gases, or dust. |
• | Use the laser only with the specifically designated batteries. Use of any other batteries |
| may create a risk of fire. |
• | Store idle laser out of reach of children and other untrained persons. Lasers are dangerous |
| in the hands of untrained users. |
• Use only accessories that are recommended by the manufacturer for your model. | |
| Accessories that may be suitable for one laser, may create a risk of injury when used on |
| another laser. |
• | Do not use optical tools such as a telescope or transit to view the laser beam. Serious eye |
| injury could result. |
• | Do not place the laser in a position which may cause anyone to intentionally or |
| unintentionally stare into the laser beam. Serious eye injury could result |
• | Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring |
| into the laser beam. |
• | Repairs and servicing MUST be performed by a qualified repair facility. Repairs performed |
| by unqualified personnel could result in serious injury. |
• | WARNING: DO NOT DISASSEMBLE THE LASER. There are no user serviceable |
| parts inside. Disassembling the Laser will void all warranties on the product. Do not modify |
| the product in any way. Modifying the tool may result in Hazardous Laser Radiation |
| Exposure. |
• | Do not operate the laser around children or allow children to operate the laser. Serious eye |
4
5
6 |
| injury may result. |
• | Do not remove or deface warning labels. Removing labels increases the risk of exposure |
| to radiation. |
• | Position the laser securely. Damage to the laser or serious injury could result if the laser |
| falls. |
• | CAUTION: Occasionally, pipes and electrical wiring may not be detected by this |
| product. The sensor will not detect hot wires inside metal pipe or metal conduit, behind |
| metallic wall covering, or behind some plywood or other dense materials. |
• | CAUTION: Material thickness, type of material, moisture content, and other variables |
| can effect sensing results. The sensor may detect electric wiring or pipes in the same |
| manner that studs are detected depending on their location to the wall surface. Use |
| caution when drilling, nailing or cutting into walls, floors and ceilings which may contain |
| electrical wiring or pipes. These items may be detected by the sensor in the same manner |
| in which studs are detected. Because studs are normally spaced 16 inches (406 mm) or |
| 24 inches (610 mm) apart and are usually |
| closer together or of a different width. Always turn off the power when working near |
| electrical wires. |
• | CAUTION: Use of controls or adjustments or performance of procedures other than |
| those specified in this manual may result in hazardous laser radiation exposure. |
7 | 8 |
• This product is intended for use in a temperature range of 41°F(5°C) - 104°F(40°C). |
The label on your tool may include the following symbols.
V | volts | mW | milliwatts |
nm | wavelength in nanometers | IIIa | Class IIIa Laser |
9 |
10 | Wall | |
| ||
Before | Mur | |
Pared | ||
Avant | ||
| ||
Antes |
| |
After |
| |
Après | Spacer | |
Después | ||
Pièce d’espacement | ||
| ||
| Pieza espaciadora |