Unpacking Instructions

THIS FAN IS SUITABLE FOR DAMP LOCATIONS

SUCH AS COVERED PORCHES, COVERED PATIOS, AND COVERED

DECKS...ANYWHERE THERE IS A ROOF OVERHEAD.

Tools Needed for Assembly

One Phillips head screwdriver	One stepladder
One 1/4” blade screwdriver	One wire stripper

One 5/16” open end wrench or pliers

7/16”, 1/2” & 9/16” wrench or socket wrench One 1/4” drill bit

MATERIALS

Wiring outlet box and box connectors must be of type required by the local code. The minimum wire would be a 3-conductor (2-wire with ground) of following size:

Installed Wire Length	Wire Size A.W.G.
Up to 50 ft.	14
50-100 ft.	12

WARNING

Before you assemble your ceiling fan, refer to section on proper method of wiring your fan (page 8). If you feel you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician.

For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should you be interrupted.

WARNING

Do not install or use fan if any part is damaged or missing. Call Toll-Free:

1-800-654-3545

WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson could result in personal injury or property damage.

1.Check to see that you have received the following parts:

NOTE: If you are uncertain of part description, refer to exploded view illustration.

NOTE: Blades and downrod kit sold separately.

a.Fan assembly

b.Two fan motor covers

c.One decorative downrod sleeve

d.One upper decorative downrod sleeve assembly

e.One decorative strap ring

f.One ceiling canopy

g.Four right hand blade flanges

h. Four left hand blade flanges

i.One hanger ball/downrod extension assembly

j.One hanger bracket assembly

k.Eight blade medallions

l.One SW22 wall control with almond and

white knobs	3

m.Mounting bracket bag, containing:

1.One 3/8 x 2” lag bolt

2.One 3/8 x 5” lag bolt

3.Two 3/8” flat washers

4.One brass barrel nut

5.One bushing

6.One ceiling support cable

7.One 5/32 x 10mm phillips screw

n.One hardware bag, containing:

1.Five wire connectors

2.One 1/16” hex wrench

3.One clevis pin

4.One hair pin clip

5.Two threaded studs

6.Two lockwashers

7.Two knurled knobs

8.Two 5/16-18 x 1/4” cup point setscrews

9.One 3/16” hex wrench

o.One flange assembly bag, containing:

1.Seventeen #8-32 x 15mm flat head screws

p.Two blade assembly bags, each containing:

1.Twenty-five #10-32 x 18mm oval head screws

q.One downrod assembly bag, containing:

1.Nine 1/4 x 10mm round head screws

NOTE: Keep all bags unopened until time of assembly. Then place the parts from each loose parts bags in a small container to keep them from being lost. If any parts are missing, contact your local retailer or catalog outlet for replacement before proceeding.

2.Remove the fan assembly from the protective plastic bag. Place the fan assembly into the foam pad with the downrod coupling facing up.

The foam pad serves as a holder for the fan during the first stages of assembly.

U.L. Model No.: CF3300

CF3300ORH, CF3300AP specifications

The Emerson CF3300 series boasts two remarkable ceiling fans, the CF3300AP and the CF3300ORH, both engineered to provide an optimal blend of style, functionality, and energy efficiency. These fans are designed for residential and commercial settings, making them versatile choices for a variety of environments.

One of the most notable features of the CF3300AP is its sophisticated design. It comes in a polished aluminum finish that adds a touch of elegance to any space. The CF3300ORH, on the other hand, sports a rich oil-rubbed bronze finish, giving it a more traditional feel. Both models are aesthetically pleasing and fit well within various decor styles, from modern to classic.

In terms of functionality, these ceiling fans are equipped with powerful yet efficient motors. The DC motor technology employed in the CF3300 series ensures a quiet operation, allowing users to enjoy the cooling breeze without disruptive noise. The fans also come with multiple speed settings that enable users to customize airflow according to their preference.

Energy efficiency is another hallmark of the Emerson CF3300 models. Designed with sustainability in mind, these fans consume significantly less electricity compared to traditional ceiling fans, making them an eco-friendly option. This not only reduces the carbon footprint but also leads to lower energy bills, appealing to environmentally conscious consumers.

Installation of both the CF3300AP and CF3300ORH is made simple with their user-friendly design. They come with a comprehensive Installation Guide, allowing DIY enthusiasts to set them up with ease. For those who prefer professional installation, the fans are compatible with standard ceiling mounting systems.

Another standout feature is the incorporation of advanced airflow technologies. The fans are designed with large blades that maximize air circulation, providing a refreshing breeze throughout the entire space. Additionally, their reverse function allows for year-round use by pushing warm air down during winter months, making them a versatile solution for climate control.

The Emerson CF3300 series also offers remote control capabilities, providing convenience for adjusting fan speeds and settings from anywhere in the room. This modern feature allows users to avoid leaving their seats, enhancing comfort and usability.

In summary, the Emerson CF3300AP and CF3300ORH ceiling fans blend elegant aesthetics with advanced technology, energy efficiency, and user-friendliness. Ideal for a variety of settings, these fans promise to enhance comfort while providing stylish solutions for indoor air circulation. With their robust features and designs, the CF3300 series continues to stand out in the market of ceiling fans.