Pioneer SC-07, SC-05 manual HDMI Control Setting the HDMI options, Before using synchronization

11HDMI Control

Setting the HDMI options

You must adjust the settings of this receiver as well as HDMI Control-compatible connected components in order to make use of the HDMI Control function. For more information see the operating instructions for each component.

Setting the HDMI Control mode

Choose whether to set this unit’s HDMI Control function ON or OFF. You will need to set it to ON to use the HDMI Control function.

•When using a TV not manufactured by Pioneer, put this setting to OFF.

1Set the operation selector switch to RCV, then press

SETUP.

2Select ‘System Setup’, then press ENTER.

3Select ‘Other Setup’, then press ENTER.

4Select ‘HDMI Control Setup’ from the Other Setup menu.

4d.Other Setup		4d4.HDMI Control Setup
A/V RECEIVER			A/V RECEIVER
1. Multi Ch In Setup		HDMI Control	:	ON
2. ZONE Audio Setup		PQLS	:	AUTO
3. SR+ Setup
4. HDMI Control Setup
5. Flicker Reduction Setup
Exit	Return	Exit		Finish

6Only when ON was selected at step 5: Select AUTO or OFF for the PQLS setting.

•AUTO – PQLS is enabled. A precision quartz controller in this receiver eliminates distortion caused by timing errors (jitter), giving you the best possible digital-to-analog conversion from audio CD sources when you use the HDMI interface. This is valid as an HDMI function for PQLS-compatible players.2

•OFF – PQLS is disabled.

4d4.HDMI Control Setup

A/V RECEIVER

HDMI Control	:	ON
PQLS	:	AUTO

Exit Finish

7When you’re finished, press HOME MENU. You will finish to HOME MENU.

Before using synchronization

Once you have finished all connections and settings, you must:

1Put all components into standby mode.

2Turn the power on for all components, with the power for the flat panel TV being turned on last.

5Select the ‘HDMI Control’ setting you want.

•ON – Enables the HDMI Control function. When this unit’s power is turned off and you have a supported source begin playback while using the HDMI Control function, the audio and video output from the HDMI connection are output from the flat panel TV.1

•OFF – The HDMI Control is disabled. Synchronized operations cannot be used. When this unit’s power is turned off, audio and video of sources connected via HDMI are not output.

3Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not.

4Check whether the components connected to all HDMI inputs are properly displayed.

Note

1• When HDMI Control is set to ON, the audio/video signals input at the HDMI IN terminals are output at the HDMI OUT terminal even when this receiver is switched off.

•With HDMI Control set to ON, Input Setup and HDMI Input are automatically set to off.

2• When this set is connected by HDMI cable to a Pioneer player that is compatible with the PQLS function via HDMI connection and a CD is played or HDMI re-authentication is performed (the HDMI indicator blinks), the PQLS effect is enabled and the listening mode is set to stereo.

•If a listening mode other than stereo is selected while the PQLS effect is enabled, the PQLS effect is disabled.

90

En