Pioneer SC-05, SC-07 manual Using other functions, Setting, What it does, Options

Using other functions 13

Setting	What it does
DUAL	Specifies how dual mono
(Dual	encoded Dolby Digital
Mono)	soundtracks should be played.
	Dual mono is not widely used, but
	is sometimes necessary when
	two languages need to be sent to
	separate channels.

Option(s)

CH1 –

Channel 1 is

heard only

CH2 –

Channel 2 is

heard only

CH1 CH2 – Both channels heard from front speakers

Setting	What it does	Option(s)
DIMENSIONh	Adjusts the depth of the surround	–3 to +3
	sound balance from front to back,	Default: 0
	making the sound more distant
	(minus settings), or more forward
	(positive settings).
PANORAMAh	Extends the front stereo image to	OFF
	include the surround speakers for
		ON
	a ‘wraparound’ effect.
C. IMAGEi Adjusts the center image to		0 to 10
(Center	create a wider stereo effect with	Defaults:
	vocals. Adjust the effect from 0

DRC		Adjusts the level of dynamic	AUTOd
(Dynamic		range for movie soundtracks
			MAX
Range		optimized for Dolby Digital, DTS,
Control)		Dolby Digital Plus, Dolby TrueHD,	MID
		DTS-HD and DTS-HD Master
			OFF
		Audio (you may need to use this
		feature when listening to
		surround sound at low volumes).
LFE ATT		Some Dolby Digital and DTS	0dB
(LFE		audio sources include ultra-low
			–5dB/ –10dB/
Attenuate)		bass tones. Set the LFE attenuator
			–15dB/ –20dB/
		as necessary to prevent the ultra-	OFF
		low bass tones from distorting the
		sound from the speakers.
		The LFE is not limited when set to
		0 dB, which is the recommended
		value. When set to –5 dB, –10 dB,
		–15 dB or –20 dB, the LFE is
		limited by the respective degree.
		When OFF is selected, no sound
		is output from the LFE channel.
SACD		Brings out detail in SACDs by	0dB
GAIN	e	maximizing the dynamic range
			+6 dB
		(during digital processing).
HDMIf		Specifies the routing of the HDMI	AMPLIFIER
(HDMI		audio signal out of this receiver
			THROUGH
Audio)		(amp) or through to a TV or flat
		panel TV. When THROUGH is
		selected, no sound is output from
		this receiver.
A. DELAY		This feature automatically	OFF
(Auto		corrects the audio-to-video delay
			ON
delay)		between components connected
		with an HDMI cable. The audio
		delay time is set depending on the
		operational status of the display
		connected with an HDMI cable.
		The video delay time is
		automatically adjusted according
		to the audio delay time.g
C. WIDTHh		Provides a better blend of the	0 to 7
(Center		front speakers by spreading the	Default: 3
Width)		center channel between the front
(Applicable		right and left speakers, making it
only when		sound wider (higher settings) or
using a		narrower (lower settings).

center speaker)

Image)	(all center channel sent to front	Neo:6 MUSIC:
(Applicable		3
only when	right and left speakers) to 10	Neo:6
using a	(center channel sent to the center	CINEMA: 10
center	speaker only).
speaker)
EFFECT	Sets the effect level for the	10 to 90
	currently selected Advanced
	Surround mode (each mode can
	be set separately).

a.When MCACC OFF is selected, all MCACC preset memories become deactivated.

b.When EQ OFF is selected, the MCACC indicator does not light even when a MCACC preset memory is selected.

c.The adjustment can be made only when TONE is set to ON. d.The initially set AUTO is only available for Dolby TrueHD signals.

Select MAX or MID for signals other than Dolby TrueHD. e.You shouldn’t have any problems using this with most SACD

discs, but if the sound distorts, it is best to switch the gain setting back to 0 dB.

f. • HDMI Audio setting cannot be switched while performing synchronized amp mode operations.

•The synchronized amp mode must be turned on in order to play the receiver’s HDMI audio and video input signals from the TV with the receiver’s power in the standby mode. See Synchronized amp mode on page 91.

g.This feature is only available when the connected display supports the automatic audio/video synchronizing capability (‘lip-sync’) for HDMI. If you find the automatically set delay time unsuitable, set A. DELAY to OFF and adjust the delay time manually. For more details about the lip-sync feature of your display, contact the manufacturer directly.

h.Only when listening to 2-channel sources in Dolby Pro Logic IIx Music/Dolby Pro Logic II Music mode.

i.Only when listening to 2-channel sources in Neo:6 MUSIC/CINEMA mode.

97

En