Pioneer SC-05, SC-07 Connecting your equipment About the video converter, Connecting using Hdmi

Connecting your equipment

About the video converter

The video converter ensures that all video sources are output through all of the MONITOR VIDEO OUT jacks. The only exception is HDMI: since this resolution cannot be downsampled, you must connect your monitor/TV to the receiver’s HDMI video outputs when connecting this

video source.1

If several video components are assigned to the same input function (see The Input Setup menu on page 92), the converter gives priority to HDMI, component, S- Video, then composite (in that order).

Terminal for connection	Terminal for connection
with source device	with TV monitor

03

•For optimal video performance, THX recommends switching Digital Video Conversion (in Setting the Video options on page 98) OFF.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Connecting using HDMI

If you have an HDMI or DVI (with HDCP) equipped

High picture quality

HDMI IN

PR PB Y

COMPONENT VIDEO IN

S-VIDEO IN

VIDEO IN

	HDMI OUT
PR	PB	Y
COMPONENT VIDEO
	OUT
	S-VIDEO
MONITOR OUT
	VIDEO
MONITOR OUT

component, you can connect it to this receiver using a commercially available HDMI cable.2

The HDMI connection transfers uncompressed digital video, as well as almost every kind of digital audio that the connected component is compatible with, including DVD-Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio (see below for limitations), Video CD/Super VCD, CD and MP3. See About the video converter above for more on HDMI compatibility.

SC-07 only: When connecting to an HDMI/DVI- compatible monitor or a flat panel TV using the HDMI OUT2 terminal, switch the HDMI output setting to HDMI OUT2 or HDMI OUT ALL. See Switching the HDMI output on page 100.

Video signals can be output

Note

1 If the video signal does not appear on your TV or flat panel TV, try adjusting the resolution settings on your component or display. Note that some components (such as video game units) have resolutions that may not be converted. In this case, try switching Digital Video Conversion (in Setting the Video options on page 98) OFF.

2• An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Digital Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVIHDMI) to do so. A DVI connection, however, does not support audio signals. Consult your local audio dealer for more information.

•If you connect a component that is not compatible with HDCP, an HDCP ERROR message is displayed on the front panel display. Some components that are compatible with HDCP still cause this message to be displayed, but so long as there is no problem with displaying video this is not a malfunction.

•Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers.

•This receiver supports SACD, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio. To take advantage of these formats, however, make sure that the component connected to this receiver also supports the corresponding format.

17

En