Pioneer SC-05, SC-07 manual Using Front Stage Surround Advance, Listening in stereo, Tip

Listening to your system 05

•MONO FILM – Creates surround sound from mono soundtracks

•ENT.SHOW – Suitable for musical sources

•EXPANDED – Creates an extra wide stereo field1

•TV SURROUND – Provides surround sound for both mono and stereo TV sources

•ADVANCED GAME – Suitable for video games

•SPORTS – Suitable for sports programs

•CLASSICAL – Gives a large concert hall-type sound

•ROCK/POP – Creates a live concert sound for rock and/or pop music

•UNPLUGGED – Suitable for acoustic music sources

•EXT.STEREO – Gives multichannel sound to a stereo source, using all of your speakers

•PHONES SURR. – When listening through headphones, you can still get the effect of overall surround.

2While listening to a source, press STEREO/A.L.C. for stereo playback.

Press repeatedly to switch between:

•STEREO – The audio is heard with your surround settings and you can still use the Midnight, Loudness, and Tone functions.

•A.L.C. – Listening in Auto level control stereo mode.

•F.S.SURR FOCUS – See Using Front Stage Surround Advance below for more on this.

•F.S.SURR WIDE – See Using Front Stage Surround Advance below for more on this.

Using Front Stage Surround Advance

The Front Stage Surround Advance function allows you to create natural surround sound effects using just the front speakers and the subwoofer.

iPod CTRL
STATUS	PHASE CTRL	CH LEVEL
THX	MPX	MEMORY

Tip

•When an Advanced Surround listening mode is selected, the effect level can be adjusted using the EFFECT parameter in Setting the Audio options on page 96.

Listening in stereo

When you select STEREO, you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). Dolby Digital, DTS and WMA9 Pro multichannel sources are downmixed to stereo.

In the Auto level control stereo mode (A.L.C.), this receiver equalizes playback sound levels if each sound level varies with the music source recorded in a portable audio player.

		STATUS	PHASE CTRL		CH LEVEL
		THX	MPX		MEMORY
	TV SOURCE RCV	AUTO/	STEREO/	STANDARD ADV SURR
		DIRECT	A.L.C.
		PGM
			BD MENU
CH	VOL	SIGNAL SEL SLEEP		DIMMER	AUDIO
	VOL

SR+ SBch MCACC

1 Set the operation selector switch to RCV.

	TV SOURCE RCV	AUTO/	STEREO/	STANDARD ADV SURR
		DIRECT	A.L.C.
		PGM
			BD MENU
CH	VOL	SIGNAL SEL SLEEP		DIMMER AUDIO
	VOL

SR+ SBch MCACC

1Set the operation selector switch to RCV.

2While listening to a source, press STEREO/A.L.C. to select Front Stage Surround Advance modes.

•STEREO – See Listening in stereo above for more on this.

•A.L.C. – See Listening in stereo above for more on this.

•F.S.SURR FOCUS – Use to provide a rich surround sound effect directed to the center of where the front left and right speakers sound projection area converges.

•F.S.SURR WIDE – Use to provide a surround sound effect to a wider area than FOCUS mode.2

FOCUS position		WIDE position
(Recommended)
Front left	Front right	Front left	Front right
speaker	speaker	speaker	speaker

Note

1Use with Dolby Pro Logic for a stereo surround effect (stereo field is wider than Standard modes with Dolby Digital sources).

2When using F.S.SURR WIDE, a better effect can be obtained if the Full Auto MCACC procedure under Advanced MCACC is performed. For more on this, refer to Automatically setting up for surround sound (MCACC & Full Band Phase Control) on page 10.

37

En