Leveling the washer-dryer
•To access the front leveling legs, tilt the machine backwards,
leaning it against a wall or other stable structure.
• Adjust the legs up or down (Fig. 9) to
ensure the washer is resting solid and
does not rock
•Check that the angle of inclination, measured according to the work top, does not exceed 2°.
IMPORTANT: The machine must rest solid on a sturdy floor for optimum performance and minimum vibration.
If a cabinet door is installed, a min. opening of 8 sq. in. should be provided for make up air. Louvered doors with equivalent air openings are acceptable. Allow clearances behind door(s) to avoid rubbing between back of cabinet door(s) and front control panel. Additional clearances for all, door and floor molding may be required.
10Installing the
