Pioneer SC-05, SC-07 manual Controlling the rest of your system Multi Operation and System Off

Controlling the rest of your system

Multi Operation and System Off

The Multi Operation feature allows you to program a series of up to 5 commands for the components in your system. For example, you could turn on your TV, turn on your DVD player and start playing the loaded DVD using only two buttons on the remote control.

Similar to multi operations, System Off allows you to use one button to stop and switch off a series of components

in your system at the same time.1

Programming a multi-operation or a shutdown sequence

Set the remote control operation mode selector switch to RCV when you want to program this receiver’s operations, to SOURCE when you want to program operations of other components.

RECEIVER MAIN			SOURCE	TVCONTROL
	ZONE2	3		INPUT	MUTE	MUTE
		MULTI		AUDIO		VIDEO
		OPERATION		PARAMETER	TUNE	PARAMETER
				EXIT		TOOLS
DVD	BD	DVR1TV	DVR21
				TOP MENU		MENU
VIDEO1	VIDEO2	VIDEO3	DVR2TV	BAND		T.EDIT
HOMEMEDIA				ST	ENTER	ST
GALLERY	CD	CD-R	PHONO
				CATEGORY		RETURN
HDMI	TUNER	XM	SIRIUS	HOME
	INPUTSELECT			MENU	TUNE
				iPod CTRL	PHASE CTRL	CH LEVEL
				STATUS
				THX	MPX	MEMORY

1While pressing MULTI OPERATION, press HOME MENU.

The remote LCD display shows SETUP.

2Use / to select MULTI OP or SYS OFF from the menu and press ENTER.

If you selected Multi Operation (MULTI OP), the LCD on the remote prompts you for an input source button.

If you selected System Off (SYS OFF), go to step 4.

3Press the input source button for the component that will start the multi-operation, then press ENTER. For example, if you want to start the sequence by switching on your DVD player, press DVD.

4Use / to select CODE EDT, then press ENTER. To erase any previously stored multi-operations (or shutdown sequences) select CODE ERS above.

5Use / to select a command in the sequence, then press ENTER.

If this is the first command in the sequence, select 1ST CODE. Otherwise, simply choose the next command in the sequence. PRES KEY flashes after you press ENTER.

14

6If necessary, press the input source button for the component whose command you want to input.

This is only necessary if the command is for a new component (input source).

7Select the button for the command you want to input.

The following remote control commands can be selected:

				AUDIO					VIDEO
RECEIVER MAIN				PARAMETER		TUNE			PARAMETER
			SOURCE	EXIT				TOOLS
	ZONE2	3		TOP MENU					MENU
		MULTI		BAND					T.EDIT
		OPERATION
DVD	BD	DVR1	DVR2	ST		ENTER			ST
				CATEGORY					RETURN
VIDEO1	VIDEO2	VIDEO3	TV	HOME
HOME MEDIA				MENU		TUNE
	CD	CD-R	PHONO	iPod CTRL
GALLERY				STATUS		PHASE CTRL			CH LEVEL
HDMI	TUNER	XM	SIRIUS	THX		MPX			MEMORY
	INPUT SELECT			AUTO/	STEREO/
							STANDARD ADV SURR
				DIRECT		A.L.C.
				PGM
					BD MENU
				SIGNAL SEL		SLEEP	DIMMER		AUDIO
	TV SOURCE RCV			SR+		SBch	MCACC
									DISP
				A.ATT		GENRE	HDMI OUT
CH	VOL		VOL
				D.ACCESS			CLASS		CH

ENTER

CLR

TVCONTROL

INPUT MUTE MUTE

•You don’t need to program the receiver to switch on or off. This is done automatically.

With Pioneer components, you don’t need to:

•program the power to switch off in a shutdown sequence (except DVD recorders);

•program the power to switch on if it’s the source component selected in step 3;

•program a Pioneer TV or monitor to switch on if the input function (selected in step 2) has video input terminals;

These take priority in multi operations (not shutdown).

8Repeat steps 5 to 7 to program a sequence of up to five commands.

9When you’re finished, use / to select EXIT from the menu and press ENTER.

You will return to the remote control Setup menu. Select * EXIT * again to exit.

Note

1 • Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see Setting the remote to control other components on page 102 for more on this).

•Some units may take some time to power up, in which case multiple operations may not be possible.

•Power on and off commands only work with components that have a standby mode.

105

En