Pioneer SC-05, SC-07 manual Connecting an IR receiver

Other connections

3Use the INPUT SELECTOR dial to select the source for the zone you have selected.

For example, ZONE 2 CD-Rsends the source connected to the CD-Rinputs to the primary (ZONE 2) sub room.

•If you select TUNER, you can use the TUNER controls to select a preset station (see Saving station presets on page 42 if you’re unsure how to do this).1

•It is not possible to use the multi-zone function to play different inputs from among Home Media Gallery, XM and SIRIUS Radio in different zones. (It is possible to play the same input in different zones.)

4Use the MASTER VOLUME dial to adjust the volume.

This is only possible if you selected the VARIABLE volume control in ZONE Audio Setup on page 95.2

5When you’re finished, press CONTROL again to return to the main zone controls.

You can also press MULTI-ZONE & SOURCE ON/OFF on the front panel to switch off all output to the sub zone(s).3

MULTI-ZONE remote controls

09

Connecting an IR receiver

If you keep your stereo components in a closed cabinet or shelving unit, or you wish to use the sub zone remote control in another zone, you can use an optional IR receiver (such as a Niles or Xantech unit) to control your system instead of the remote sensor on the front panel of

this receiver.4

1Connect the IR receiver sensor to the MULTI-ZONE & SOURCE IR IN (MAIN) jack on the rear of this receiver.

If you also plan to use a separate IR receiver in the sub room, connect this to the IR IN (ZONE 2) jack.

Closet or shelving unit

Non-Pioneer

IRcomponent

IN

Pioneer

CONTROLcomponent

IN OUT

Set the MULTI-ZONE operation switch to ZONE 2 or ZONE 3 to operate the corresponding zone.

The following table shows the possible MULTI-ZONE remote controls:

Button What it does

Switches on/off power in the currently selected sub zone.

INPUT Use to select the input source in the currently

LAN(10/100)
	XM
	IN
	COAXIAL
	ASSIGNABLE
	IN 1 (DVD)
HDMI
BD	IN 2 (CD)
IN
	IN 3 (DVR2)
IN
1	IN 1
	(TV/SAT)
IN	IN 2
2	(DVR1)
	IN 3
	(VIDEO1)

IN

3IN 4 (CD-R)

ASSIGNABLE 1 - 3	ASSIGNABLE
	ZONE3/
OUT	SOURCE

1OUT

(HDMI

CTRL)

SOURCE

OUT

OUT

2OPTICAL DIGITAL

12 V	1			IN 1		IN
TRIGGER
(OUTPUT		(DVD)				(VIDEO1)
12V
TOTAL
50mA		PR		PB	Y	PR
MAX)	2			ZONE 2 OUT
SIRIUS				R	L
IN						ZONE 2
						OUT
IR						ZONE 3
						OUT
IN				PHONO	CD	CD-R
1				IN	IN	OUT
IN			SIGNAL
			GND	L
2
OUT
				R
IN
CONTROL
OUT
					CAUTION:
					SPEAKER IMPEDANCE 6Ω -
					ATTENTION:
					ENCEINTE D'IMPEDANCE D
					SELECTABLE
					SEE INSTRUCTION
					MANUAL
					SELECTABLE
RS-232C					VOIR LE MODE
					D'EMPLOI

IR
IN
1
IN	SIGNAL
	GND	L
2
OUT
		R
IN
CONTROL
OUT

SELECT selected sub zone.

IR receiver

Input Use to select the input source directly (this may

source not work for some functions) in the currently buttons selected sub zone.

VOL +/– Use to set the listening volume in the currently selected sub zone.

2Connect the IR IN jack of another component to the MULTI-ZONE & SOURCE IR IN IR OUT jack on the rear of this receiver to link it to the IR receiver.

Please see the manual supplied with your IR receiver for the type of cable necessary for the connection.

•If you want to link a Pioneer component to the IR receiver, see Operating other Pioneer components with this unit’s sensor on page 108 to connect to the CONTROL jacks instead of the IR OUT jack.

Note

1The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also changes the station in the other zone. Please be careful not to change stations when recording a radio broadcast.

2The volume levels of the main and sub zones are independent.

3• You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control first.

•If you don’t plan to use the MULTI-ZONE feature for awhile, turn off the power in both the sub and main rooms so that this receiver is in standby.

4• Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote sensor window.

•Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your component to check for IR compatibility.

•If using two remote controls (at the same time), the IR receiver’s remote sensor takes priority over the remote sensor on the front panel.

69

En