AIR CONDITIONER CARE
Your new air conditioner is designed to give you many years of dependable service. This section tells you how to clean and care for your air conditioner properly. Call your local authorized dealer for an annual checkup. Remember the cost of this service call is your responsibility.
Cleaning the Air Filter
The air filter is removable for easy cleaning. A clean filter helps remove dust, lint, and other particles from the air and is important for best cooling and operating ef ficiency. Check the filter every 2 weeks to see whether it needs cleaning.
NOTE: Do not operate the air conditioner without the filter in place.
1.Turn off the air conditioner.
2.To remove the air filter,open the air inlet grille and take the air fliter.
3.Use a vacuum cleaner to clean air filter. If the air filter is very dirty, wash it in warm water with a mild detergent. Do not wash the air filter in the dishwasher or use any chemical cleaners. Air dry the air filter completely before replacing to ensure maximum efficiency.
4.Replace the air filter by sliding the air filter back in on either side of the front panel.
Cleaning the Front Panel
1.Turn off the air conditioner.
2.Clean the front panel with a soft, damp cloth.
3.Air dry the front panel completely.
A
B
A. Air Fliter
B.Inlet grille
Repairing Paint Damage
Check once or twice a year for paint damage. This is very important, especially in areas near oceans or where rust is a problem. If needed, touch up with a good grade enamel paint.
Annual Maintenance
Your air conditioner needs annual maintenance to help ensure steady, top performance throughout the year. Call your local authorized dealer to schedule an annual checkup. The expense of an annual inspection is your responsibility.
TROUBLESHOOTING
Before calling for service, try the suggestion below to see whether you can solve your problem without outside help.
Air conditioner will not operate
Electrical Shock Hazard
WARNING
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
■The power supply cord is unplugged. Plug into grounded 3 prong outlet. See "Electrical Requirements".
■The power supply cord has tripped (Reset button has
popped out). Press and release RESET (listen for click; Reset button will latch and on some devices, a green light will turn on) to resume operation.
■A household fuse has blown, or circuit breaker has tripped. Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician. See "Electrical Requirements".
■The Power button has not been pressed. Press the Power button.
■The local power has failed. Wait for power to be restored.
17
