To set the Timer to turn on the air conditioner, changing the previous settings:
1.Turn on air conditioner.
2.Adjust the mode to Cool, Dry, Fan or Heat (Heat/Cool models only).
3.For Cool or Heat (Heat/Cool models only) mode:
■Adjust fan speed to High, Med, Low or Auto.
■Adjust temperature between 64°F and 90°F (18°C and 32°C).
4.For Fan mode, adjust fan speed to High, Med or Low. NOTE: In Fan mode, temperature cannot be set.
5.For Dry mode, adjust temperature up or down by 4°F (2°C).
6.Turn off air conditioner.
7.Press TIMER. Timer indicator light will flash. Display will show remaining hours before the air conditioner will turn on.
8.Press the plus or minus TEMP button to change the delay time from 30 minutes to 24 hours.
9.After 5 seconds, Timer indicator light will remain on. Display will show the current room temperature.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1.Press TIMER once after it has been programmed. Display will show remaining time.
2.While the display is showing the remaining time, press TIMER again. Timer indicator light will turn off.
To see or change the remaining time (in hours):
1.Press TIMER once after it has been programmed. Display will show remaining time.
2.While the display is showing the remaining time, press the plus or minus TEMP button to increase or decrease the time.
3.After 5 seconds, the display will show the current room temperature.
NOTE: Remote control may differ in appearance.
SUPER SMART
Using the Remote Control
Power
Press POWER to turn on air conditioner.
Mode
Press MODE to select Cool, Dry, Fan or Heat (Heat/Cool models only).
Smart System Control
NOTE: One CR2025 battery (included) powers the remote control. Replace battery after 6 months of use, or when the remote control starts to lose power.
Please ensure the correct direction for polarity of the cell same as the indicator on the bracket.
A
A. Bracket
■Disposal of bettery：Old batteries must be removed and disposed of in accordance with current legislation as they are harmful to the environment.
The air conditioner automatically selects Cool or Dry mode, depending on room temperature and sets the temperature to 79°F (26°F).
■The temperature set point can be adjusted down to 75°F (24°C) or up to 83°F (28°C). Press the up or down arrow button once to change the temperature 2°F (1°C) or twice to change it 4°F (2°C).
■If the current room temperature is lower than the temperature set point, Dry mode is selected. Fan runs on Auto speed only.
■If the current room temperature is higher than the temperature set point, Cool mode is selected. Fan speed may be selected by the user.
1. Press Smart System control.
SMART
2. In Cool mode, press FAN to select High, Med, Low or Auto.
14
