Window Installation-Position Cabinet in window
Place Cabinet In Window
NOTE: Windows come in a variety of different styles. Therefore, it may be necessary to modify or improve your particular installation.
1. Open window and mark center of window stool.
2. Cut the seal strip to fit the underside of the bottom window sash. Remove the
A
B
A. Window Sash
B.Window Sash Sealing Strip
3.Place cabinet in window with bottom stool angle firmly seated over window stool as shown .
Bring window down temporarily behind top angle to hold cabinet in place.
A
C
B
A.Cabinet
B.Stool
C.Lower Channel
A
B
C
A.Window Sash
B.Seal
B."L" Shaped Mounting Channel
4.Shift cabinet left or right as needed to line up center of cabinet on center line marked on stool.
5.Fasten cabinet to window stool with (2 )3/4" screws
into holes(you may wish to pre_drill pilot holes).
A |
A.3/4" Screws (2) |
Install Support Brecket
1.Hold each support bracket flush against outside of sill,and tight to bottom of cabinet as shown.
Mark brackets at top level of sill,and remove.
MARK |
8
