Pioneer SC-05, SC-07 manual Using the SR+ mode with a Pioneer flat panel TV, Other connections

Other connections 09

•Use a 3-ringed miniplug SR+ cable to connect the CONTROL IN jack of this receiver with the CONTROL OUT jack of your flat panel TV.

VIDEO	Pioneer flat panel TV	VIDEO
INPUT 1		INPUT 2

DVD playerSatellite receiver, etc.

DVD		TV/SAT
AUDIO IN		AUDIO IN
		SC-07
INPUT		MASTER
SELECTOR		VOLUME
PHASE	ADVANCED	DIGITAL VIDEO
CONTROL	MCACC	SCALERHDMI

￿STANDBY/ON

This receiver

To make the most of the SR+ features, you should connect your source components (DVD player, etc.) in a slightly different way to that described in this chapter. For each component, connect the video output directly to the flat panel TV, and just connect the audio (analog and/or digital) to this receiver.

Using the SR+ mode with a Pioneer flat panel TV

When connected using an SR+ cable, a number of features become available to make using this receiver with your Pioneer flat panel TV even easier. These features include:

•On-screen displays when making receiver settings, such as speaker setup, MCACC setup, and so on.

•On-screen volume display.

•On-screen display of listening mode.

•Automatic video input switching on the flat panel TV.

•Automatic volume muting on the flat panel TV.

See also SR+ Setup for Pioneer flat panel TVs on page 95 for more on setting up the receiver.

Important

•The SR+ features do not work when any of the HOME MEDIA GALLERY, XM, or SIRIUS Radio function is selected.

		BD MENU
		SIGNAL SEL	SLEEP	DIMMER	AUDIO
	TV SOURCE RCV	SR+	SBch	MCACC
					DISP
CH	VOL	A.ATT	GENRE	HDMI OUT
		VOL
		D.ACCESS		CLASS	CH
				ENTER

1Make sure that the flat panel TV and this receiver are switched on and that they are connected with the SR+ cable.

See Using this receiver with a Pioneer flat panel TV on page 70 for more on connecting these components.

•Make sure you have also selected the display input to which you’ve connected the receiver in The Input Setup menu on page 92.

2To switch SR+ mode on/off, set the operation selector switch to RCV, then press SR+.

The front panel display shows SR+ ON or SR+ OFF.

•The automatic video input switching and the automatic volume muting features are enabled separately; see SR+ Setup for Pioneer flat panel TVs on page 95.

71

En