Pioneer SC-07 The Advanced MCACC menu, Manual MCACC setup, MCACC Data Check, 1c.Manual MCACC

Models: SC-05 SC-07

1 138
Download 138 pages 24.78 Kb
Page 46
Image 46

07The Advanced MCACC menu

9The Auto MCACC Setup has finished! The MCACC Data Check screen appears.

2.MCACC Data Check

A/V RECEIVER

a. Speaker Setting b. Channel Level c. Speaker Distance d. Standing Wave e. Acoustic Cal EQ

f.Group Delay

g.Output PC

Manual MCACC setup

You can use the settings in the Manual MCACC setup menu to make detailed adjustments when you’re more familiar with the system. Before making these settings, you should have already completed Automatically setting up for surround sound (MCACC & Full Band Phase Control) on page 10.

Exit

Return

The settings made in the Auto MCACC Setup should give you excellent surround sound from your system, but it is also possible to adjust these settings manually using the Manual MCACC setup menu (starting below) or Manual

SP Setup menu (starting on page 55).1

You can also choose to view the settings by selecting individual parameters from the MCACC Data Check screen:

Speaker Setting – The size and number of speakers you’ve connected (see page 56 for more on this)

Channel Level – The overall balance of your speaker system (see page 47 or 57 for more on this)

Speaker Distance – The distance of your speakers from the listening position (see page 47 or 58 for more on this)2

Standing Wave – Filter settings to control lower ‘boomy’ frequencies (see page 48 for more on this)

Acoustic Cal EQ – Adjustments to the frequency balance of your speaker system based on the acoustic characteristics of your room (see page 48 for more on this)

Group Delay – The original characteristics of group delay of the speakers calibrated and the targeted characteristics can be displayed graphically (see Using Full Band Phase Control on page 13 for more on this).

Press RETURN after you have finished checking each screen. When you’re finished, select RETURN to go back to the HOME MENU.

Be sure to disconnect the microphone from this receiver upon completion of the Auto MCACC Setup.

You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers).

Caution

The test tones used in the Manual MCACC setup are output at high volume.

Important

You will need to first specify the MCACC preset you want to adjust by pressing MCACC before pressing HOME MENU (step 2 in Making receiver settings from the Advanced MCACC menu on page 43). When Manual MCACC is selected while MCACC is set to OFF, the selection screen for the MCACC memory appears. Select a memory to adjust manually.

1c.Manual MCACC

 

A/V RECEIVER

 

Select MCACC memory.

 

MCACC OFF

 

M1.MEMORY 1

 

Exit

Cancel

For some of the settings below, you’ll have to connect the setup microphone to the front panel and place it about ear level at your normal listening position.

Press HOME MENU to display the HOME MENU before you connect the microphone to this receiver. If the microphone is connected while the HOME MENU is not being displayed, the display will change to the Full Auto MCACC under Advanced MCACC.

See Problems when using the Auto MCACC Setup on page 11 for notes regarding high background noise levels and other possible interference.

If you’re using a subwoofer, switch it on and turn up the volume to the middle position.

Note

1 • Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm (5 inches) will end up with different size settings. You can correct the setting manually using the Manual speaker setup on page 55.

The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be accurate (taking delay and room characteristics into account) and generally does not need to be changed.

If Auto MCACC Setup measurement results are incorrect due to the interaction of the speakers and viewing environment, we recommend adjusting the settings manually.

2 Since the distance measurements have been set according to the sound characteristics of your speakers, there are cases where (for optimal surround sound) the actual distance may differ from the speaker distance setting.

46

En

Page 46
Image 46
Pioneer SC-07, SC-05 manual The Advanced MCACC menu, Manual MCACC setup, MCACC Data Check, 1c.Manual MCACC