Pioneer SC-07 Using other functions Switching the HDMI output, Checking your system settings

Models: SC-05 SC-07

1 138
Download 138 pages 24.78 Kb
Page 100
Image 100

13Using other functions

Switching the HDMI output

SC-07 only

Set which terminal to use when outputting video and audio signals from the HDMI output terminals (HDMI OUT1, HDMI OUT2 or HDMI OUT ALL).

The HDMI OUT1 terminal is compatible with the HDMI control function.

 

 

SIGNAL SEL

SLEEP

DIMMER

AUDIO

 

 

SR+

SBch

MCACC

 

 

 

 

 

 

DISP

 

TV SOURCE RCV

A.ATT

GENRE

HDMI OUT

 

CH

VOL

D.ACCESS

 

CLASS

CH

VOL

 

ENTER

 

 

 

 

 

CLR

Set the operation selector switch to RCV, then press

HDMI OUT.

Please wait a while when Please wait ... is displayed.

The output switches among HDMI OUT1, HDMI OUT2 and HDMI OUT ALL each time the button is pressed.1

Checking your system settings

Use the status display screen to check your current settings for features such as surround back channel processing and your current MCACC preset.

2When you’re finished, press STATUS again to switch off the display.

Resetting the system

Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this. Set MULTI-ZONEto OFF.

1Switch the receiver into standby.

2While holding down HOME MENU on the front panel, press STANDBY/ON.

The display shows RESET NO .

3Press ENTER on the front panel.

4Select ‘RESET’ using /, then press ENTER on the front panel.

The display shows RESET? OK.

5Press ENTER to confirm.

OK appears in the display to indicate that the receiver has been reset to the factory default settings.

Note that all settings will be saved, even if the receiver is unplugged.

 

CATEGORY

 

RETURN

 

HOME

 

 

 

MENU

TUNE

 

TV SOURCE RCV

iPod CTRL

 

 

STATUS

PHASE CTRL

CH LEVEL

 

THX

MPX

MEMORY

CH VOL

VOL

AUTO/

STEREO/

STANDARD ADV SURR

DIRECT

A.L.C.

PGM

BD MENU

1Set the operation selector switch to RCV, then press STATUS to check the system settings.

These appear on the front panel display.2

The front panel display shows each of the following settings for two seconds each:

Input source

Surround Back Processing

MCACC preset

ZONE 2 input

ZONE 3 input

HDMI Control

HDMI OUT

Note

1 • Synchronized amp mode on page 91 is canceled when the HDMI output is switched. If you wish to use the synchronized amp mode, switch to HDMI OUT1, then select the synchronized amp mode on the flat panel TV using the flat panel TV’s remote control.

When the power is turned off then back on after switching the HDMI output, the input is set to a setting between HDMI1 and HDMI3, or BD. 2 If the Pure Direct mode is switched on, some settings above will show OFF, even though they are on.

100

En

Page 100
Image 100
Pioneer SC-07, SC-05 Using other functions Switching the HDMI output, Checking your system settings, Resetting the system