Pioneer SC-07 Connecting your equipment, When making cable connections, 10 RS-232C connector

03Connecting your equipment

10 RS-232C connector

Use for connection to a PC for graphical output when using Advanced MCACC or Full Band Phase Control.

See Connecting a PC for Advanced MCACC output on page 72.

11 Component video inputs (x3)

Use the inputs to connect any video source that has component video output, such as a DVD player.

See Using the component video jacks on page 23.

12SC-07 only: ZONE 2 component video output Use to connect monitors or TVs in a separate room.

See MULTI-ZONE listening on page 66.

13MULTI-ZONE audio/video outputs

Use to connect a second or third amplifier and monitors or TVs in a separate room.

See MULTI-ZONE listening on page 66.

14Stereo analog audio source inputs/(outputs) (x4) Use for connection to audio sources such as CD players, tape decks, turntables, etc.

See Connecting analog audio sources on page 25.

15Composite, S-Video and Component monitor outputs

Use to connect monitors and TVs.

See Connecting your TV and DVD player on page 20.

See Using the component video jacks on page 23.

16Audio/video source inputs/(outputs) (x8)

Use for connection to audio/visual sources, such as DVD players/recorders, VCRs, etc. Each set of inputs has jacks for composite video, S-Video and stereo analog audio.

See Connecting a DVD/HDD recorder, VCR and other video sources on page 22.

17 AM and FM antenna terminals

Use to connect indoor or outdoor antennas for radio broadcasts.

See Connecting antennas on page 28.

18 Multichannel pre-amplifier outputs

Use to connect separate amplifiers for front, center, surround, surround back and subwoofer channels.

See Connecting additional amplifiers on page 65 (see also Installing your speaker system on page 26 for powered subwoofer connection).

19 Multichannel analog audio inputs

7.1channel inputs for connection to a DVD player with multichannel analog outputs.

See Connecting the multichannel analog inputs on page 63.

20 Speaker terminals

Use for connection to the main front, center, surround and surround back speakers.

See Installing your speaker system on page 26.

When making cable connections

•To avoid hum, do not lay connected cables over the top of the receiver.

•When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket.

•When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners.

16

En