Pioneer SC-07, SC-05 manual Decide which component you want to use the remote sensor

14Controlling the rest of your system

Operating other Pioneer components with this unit’s sensor

Many Pioneer components have SR CONTROL jacks which can be used to link components together so that you can use just the remote sensor of one component. When you use a remote control, the control signal is

passed along the chain to the appropriate component.1

Important

•Note that if you use this feature, make sure that you also have at least one set of analog audio, video or HDMI jacks connected to another component for grounding purposes.

1Decide which component you want to use the remote sensor of.

When you want to control any component in the chain, this is the remote sensor at which you’ll point the corresponding remote control.

2Connect the CONTROL OUT jack of that component to the CONTROL IN jack of another Pioneer component. Use a cable with a mono mini-plug on each end for the connection.

LAN(10/100)
	XM
	IN
	COAXIAL
	ASSIGNABLE
	IN 1 (DVD)
HDMI
BD	IN 2 (CD)
IN
	IN 3 (DVR2)
IN
1	IN 1
	(TV/SAT)
IN	IN 2
	(DVR1)
2	IN 3
	(VIDEO1)

IN

3IN 4 (CD-R)

ASSIGNABLE 1 - 3	ASSIGNABLE
	ZONE3/
OUT	SOURCE

1OUT

(HDMI

CTRL)

SOURCE

OUT

OUT

2OPTICAL DIGITAL

12 V	1
TRIGGER
(OUTPUT		(DVD)	CONTROL
12V
TOTAL
50mA		PR
MAX)	2

SIRIUS	IN	OUT
IN
IR
IN
1
IN	SIG
	G
2
OUT
IN
CONTROL
OUT
RS-232C
			CONTROL
		IN	OUT

3Continue the chain in the same way for as many components as you have.

Note

1 • If you want to control all your components using this receiver’s remote control, see Setting the remote to control other components on page 102.

•If you have connected a remote control to the CONTROL IN jack (using a mini-plug cable), you won’t be able to control this unit using the remote sensor.

•See Using this receiver with a Pioneer flat panel TV on page 70 if you are connecting a Pioneer flat panel TV.

108

En