JVC SR-MV50U manual Press REC Mode to select the desired recording mode. Or, Recording mode

PLUSCODE NO.

PRESS NUMBER KEY (0–9) PRESS (VCR PLUS +)

TO END

VCR PLUS+ SYSTEM

48 EN OPERATIONS ON VCR DECK

	VCR Plus+	®	Timer Programming	6 Press REC MODE to select the desired recording mode. Or
				press w e to select “SP/EP”, then press rt to select the desired
				recording mode.
You can program this unit to timer record as many as 8 programs.				7 Press ENTER to complete timer programming.
With the VCR Plus+ system, timer programming is greatly
				● To program another timer, repeat steps 3 – 7.
simplified because each TV program has a corresponding code
				● If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears
number which your unit is able to recognize.
				on the TV screen, see page 50.
You can use the remote control to enter the PlusCode number.				8 Press VCR TIMER (#) to engage the unit’s timer mode. The
				VCR timer indicator lights up on the front display panel and the
● Make sure that the unit’s built-in clock is set properly.
				DVD deck is automatically selected. When the DVD deck is in
● Turn on the unit.
				timer standby mode, the unit is automatically turned off.
● Turn on the TV and select the video channel (or AV mode).
				● To disengage the timer mode, press VCR TIMER (#) again.
● Slide the TV/CABLE/DBS/DVD switch to DVD.

VCR TIMER (#)
VCR/DVD	1	2	3
	4	5	6	0 – 9
	7	8	9
CANCEL		0
VCR PLUS+

ENTER	RETURN
REC MODE

1 Load a cassette with the record safety tab intact. If not, set “REC SAFETY” to “OFF” ( pg. 73).

2 Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.

IMPORTANT:

If you have moved to a different area or if a broadcasting station's channel number has been changed, the wrong channel number will be displayed on the VCR Plus+ program screen in step 5. When this happens, set the correct Guide Channel number for that station.

( pg. 74, “Changing VCR Plus+® Setting”)

NOTES:

●To Timer Record Weekly Or Daily Serials:

— in step 5, press number key “9” for weekly serials or number key “8” for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

●You can program this unit to timer record as many as 8 programs. If you try to program the unit to record a ninth, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra program, you must first cancel any unnecessary programs. ( pg. 50)

●To record the programs received by cable box or DBS receiver, record on the DVD discs. For details, refer to “VCR Plus+® Timer Programming” ( pg. 38).

3 Press VCR PLUS+ to access the VCR Plus+ screen.

4 Press the number keys to enter the PlusCode number of a program you wish to record, then press ENTER.

●If you have made a mistake, press CANCEL and input the correct number

before you press ENTER.

● If the number you entered is invalid, “ERROR” appears on the TV screen and “Err” appears on the front display panel.

Press CANCEL and input a valid PlusCode number.

5 The PlusCode number you entered and the matching timer recording information are displayed on the TV screen. Check the program data.

●To cancel this setting, press VCR PLUS+ or PROG/CHECK.

PROGRAM 1

(PLUSCODE NO. 12345678)

START		STOP
12:00 AM		13:00 AM
DATE		CH	SP/EP
1/ 30/04	15			SP

PRESS (RTYU, 8=DAILY 9=WEEKLY), THEN (ENTER)

(PROG/CHECK) TO END

IMPORTANT:

Make sure the channel position number you wish to record is displayed; if not, see “Changing VCR Plus+® Setting” ( pg. 74) and set the Guide Channel number correctly.