Filename [SR-MV50U_07DVD Operation2.fm]
Masterpage:Left+
42 EN
Page 42 November 22, 2004 1:03 pm
OPERATIONS ON DVD DECK
Check, Cancel And Change Programs
1When the DVD timer indicator lights on the front display
panel
Press DVD TIMER (#), then press 1.
When “ ” and the DVD timer indicator light on the front
display panel.
Press 1.
When the DVD lamp does not light up on the unit
Press VCR/DVD repeatedly so that the DVD lamp lights up on the
unit.
2Press PROG/CHECK to
access the Program Check
screen.
●To return to the previous screen
after you check the program,
press PROG/CHECK again.
To cancel the program
Press rt to select a program to
be cancelled, then press
CANCEL.
3Press rt to select the program, then press ENTER. The
program screen appears.
4Change the settings of the desired recording options as
required.
●Refer to steps 5–10 in “Manual Timer Programming” (墌pg.39).
5Press PROG/CHECK to complete timer correction. The
previous screen resumes.
6Press DVD TIMER (#).
●The DVD timer indicator also lights up on the front display panel and
the VCR deck is automatically selected. When the VCR deck is in
timer standby mode, the unit is automatically turned off.
When Programs Overlap Each Other
If “PROGRAM OVERLAPPED” appears, you have another
program overlapping the program you have just made.
Confirm with the arrow on “OK”, then press PROG/CHECK.
Program Check screen appears and conflicting programs will be
highlighted in pink.
Example: Program 3 (you have
just made) and Program 4
overlap each other.
1Confirm the overlapping
programs. Overlapping programs
appear on the TV screen.
NOTE:
If you do not mind this overlap, press
PROG/CHECK to finish the timer
program setting. The program with the lower program number will be
recorded and the other one will not be recorded correctly. If no changes
are made for approximately 1 minute, the unit will return to the normal
screen.
2Press rt to select the desired program to be cancelled or
changed.
To cancel the program
Press CANCEL.
●“THE TIMER PROGRAMING SETTING WAS CANCELLED” appears
on the TV screen for about 5 seconds, then the normal screen
resumes.
To change the program setting
Press ENTER, then go to step 3.
3Change the program setting.
●Refer to steps 5–10 in “Manual Timer Programming” (墌pg.39).
4Press PROG/CHECK to check if the conflict has been settled.
Program check screen appears.
5Engage the unit’s timer mode.
●Refer to step6 in “Check, Cancel And Change Programs”
(墌pg. 42).
NOTE:
When any overlaps remain after deletion and modification of programs,
Program Check screen remains showing the conflicting programs. In
such a case, repeat the procedure above until the conflict is solved.
Program’s information on the front display panel
You can check the details of the programs even when the power
is turned off. (It is necessary that the Power Save mode
(墌pg. 70) is disengaged or the unit is not in timer standby
mode.) However, it is not possible to cancel or change the
program’s setting.
APress PROG/CHECK.
●“NEW PROG” or “P-1” (if 8 programs have already been set)
appears.
BPress rt until the desired program number (“P-1” to “P-8”)
appears, then press ENTER.
CPress e.
●Each time you press e, the indication changes as follows (the
settings in parentheses are examples):
Date (“DATE 03.08SU”) ] Start time (“ON 11:00”) ] Stop time
(“OFF 11:30”) ] Channel (“CH1”) ] Weekly/Daily (“MO-FR
DAILY”) ] Program number (“P-1”) and recording mode (SP) ]
(Back to the beginning)
DPress PROG/CHECK to complete checking.
●The normal display resumes.
1
4
7
2
5
8
0
3
6
9
PROG/CHECK
ENTER
CANCEL
1
DVD TIMER (#)
rtw e
VCR/DVD
SR-MV50US.book Page 42 Monday, November 22, 2004 1:03 PM