Pioneer SC-05 Home Media Gallery, Additional information, Symptoms, Causes, Remedies, Refer to

Additional information 15

HOME MEDIA GALLERY

Symptoms

Cannot access the network.

Causes	Remedies	Refer to
The LAN cable is not firmly connected.	Firmly connect the LAN cable.	74
The router is not switched on.	Switch on the router.	—
Internet security software is currently	There are cases where a component with	—
installed in the connected component.	Internet security software installed cannot be
	accessed.

The audio component on the network which has been switched off is switched on.

Switch on the audio component on the	—
network before switching on this receiver.

Playback does not start while ‘Connecting...’ continues to be displayed.

The component is currently disconnected from this receiver or the power supply.

Check whether the component is properly	—
connected to this receiver or the power
supply.

The PC or Internet radio is not properly operated.

The corresponding IP address is not properly set.

Switch on the built-in DHCP server function 84

of your router, or set up the network manually according to your network environment.

The IP address is being automatically configured.

The automatic configuration process takes	—
time. Please wait.

The audio files stored on components on the network, such as a PC, cannot be played back.

Windows Media Player 11 is not currently	Install Windows Media Player 11 on your PC.	75
installed on your PC.
Audio files were recorded in formats other	Play back audio files recorded in MP3, WAV	—
than MP3, WAV (LPCM only), MPEG-4 AAC,	(LPCM only), MPEG-4 AAC, FLAC, or WMA.
FLAC, and WMA.	Note that some audio files recorded in these
	formats may not be played back on this
	receiver.

Audio files recorded in MPEG-4 AAC or FLAC	Audio files recorded in MPEG-4 AAC or FLAC	Refer to the
are being played back on Windows Media	cannot be played back on Windows Media	operation
Player 11 or Windows Media Connect.	Player 11 or Windows Media Connect. Try	manual
	using another server.	supplied
		with your
		server.
The component connected to the network is	Check whether the component is affected by	—
not properly operated.	special circumstances or is in the sleep
	mode.
	Try rebooting the component if necessary.
The component connected to the network	Try changing the settings for the component	—
does not permit file sharing.	connected to the network.
The folder stored on the component	Check the folder stored on the component	—
connected to the network has been deleted	connected to the network.
or damaged.

Cannot access the	The component connected to the network is
component connected to	not properly set.
the network.

If the client is automatically authorized, you	—
need to enter the corresponding information
again. Check whether the connection status
is set to “Do not authorize”.

There are no playable audio files on the component connected to the network.

Check the audio files stored on the	—
component connected to the network.

119

En