Pioneer SC-05, SC-07 manual Plugging in the receiver, AM loop antenna, FM wire antenna

Models: SC-05 SC-07

1 138
Download 138 pages 24.78 Kb
Page 29
Image 29

Connecting your equipment

AM loop antenna

1 Assemble the stand as shown in the illustration.1

fig. A

fig. B

fig. C

Bend the stand in the direction indicated (fig. A).

Clip the loop into the stand (fig. B).

It’s possible to fix the AM antenna to a wall (fig. C). Before fixing, make sure that the reception is satisfactory.

2Pull off the protective shields of both AM antenna wires.

3Press the AM LOOP antenna terminal tabs to open and insert one wire into each terminal.

4Release the tabs to secure the AM antenna wires.

5Place the AM antenna on a flat surface and point in the direction giving the best reception.

Avoid placing near computers, television sets or other electrical appliances and do not let it come into contact with metal objects.

FM wire antenna

Connect the FM wire antenna to the FM UNBAL 75 in the same way as the AM antenna.

For best results, extend the FM antenna fully and fix to a wall or door frame. Don’t drape loosely or leave coiled up.

Connecting external antennas

To improve FM reception connect an external FM antenna to the FM UNBAL 75 .

75 coaxial cable

ANTENNA

FM UNBAL 75 AM LOOP

03

To improve AM reception, connect a 5 m to 6 m (16 ft. to 20 ft.) length of vinyl-coated wire to the AM LOOP terminals without disconnecting the supplied AM loop antenna.

For the best possible reception, suspend horizontally outdoors.

Outdoor antenna

Indoor antenna

(vinyl-coated wire)

ANTENNA

FM UNBAL 75 AM LOOP

5 m to 6 m

(16 ft. to 20 ft.)

Plugging in the receiver

Only plug in after you have connected all your components to this receiver, including the speakers.

Plug the AC power cord into a convenient AC power outlet.

Caution

Handle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when your hands are wet, as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, or other object on the power cord or pinch the cord in any other way. Never make a knot in the cord or tie it with other cables. The power cords should be routed so that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, ask your nearest Pioneer authorized independent service company for a replacement.

The receiver should be disconnected by removing the mains plug from the wall socket when not in regular use, e.g., when on vacation.

Make sure the blue  STANDBY/ON light has gone out before unplugging.

Note

1 Do not use any antennas other than the supplied AM loop antenna.

29

En

Page 29
Image 29
Pioneer SC-05, SC-07 manual Plugging in the receiver, AM loop antenna, FM wire antenna, Connecting external antennas