Kyocera SE47 manual Answering the phone, Answering automatically, Answering using voice commands

82-N8735-1.book Page 69 Thursday, October 27, 2005 12:37 PM

To activate the Voice Wake-up setting:

1.Select Menu → Settings →

Voice Features → Voice Wake-Up →

With accessory.

2.Select Menu → Settings → Keyguard → Disabled, then press .

To wake up the phone:

1.Say “Wake Up” and listen for a tone.

2.Say “Wake Up” again until you hear two tones.

If the phone does not recognize your “Wake up” command, see “Training voice recognition” on page 70.

Answering the phone

You can set your hands-free car kit to (1) answer automatically or (2) answer using a

voice command.

Answering automatically

You can set your phone to answer automatically.

Note: This setting also works with the portable hands-free car kit.

•Select Menu → Settings → Accessories → Auto-Answer → After 5 secs.

Answering using voice commands

If Auto-Answer is turned off, you can use a voice command to answer an incoming call using the installed hands-free car kit.

•Select Menu → Settings → Accessories → Auto-Answer → Disabled.

To activate the Voice Answer setting:

1.Select Menu → Settings → Voice Features → Voice Answer.

2.Highlight Enabled and press .

3.Select Menu → Settings → Silent Mode → Normal Sounds, then press .

To answer a call:

When you receive an incoming call, the phone responds: “Incoming call, answer?” or “Incoming roam call, answer?” If the caller is recognized as a contact entry in your phone, then the phone will say “Incoming call from (Name), answer?”

• Say “Yes” or press any key except .

User Guide for the Kyocera Slider Remix KX5 Phone 69