Kyocera SE47 manual Menu options for camera mode, Restoring camera menu settings

82-N8735-1.book Page 27 Thursday, October 27, 2005 12:37 PM

–White Balance allows the camera to adjust for different lighting. Options are Automatic, Fluorescent, Incandescent, or Daylight.

–Quality sets the picture compression. The higher the compression, the better the detail of the picture (higher pixel rate). Options are Low, Medium, or High (default). When set to High, the picture file size is larger, using more memory.

–LED flashes a light to indicate a picture has been taken. Options are On (default) and Off.

–Viewfinder options are Fullscreen and Actual.

–Save Location options are Save to Card and Save to Phone.

Restoring camera menu settings

The following settings revert to the default setting each time you enter and exit the camera application:

–Low Light Mode, Self Timer, MultiShot, Viewfinder.

The following settings remain at the setting you selected each time you enter and exit the camera application:

–Flash, Resolution, Shutter Sound, White Balance, Quality, LED, and Save Location.

Menu options for camera mode

1.Press and hold to activate camera mode.

2.Select Options.

3.Press up or down to scroll through the options on the vertical menu bar:

–Settings displays available camera settings you may set up prior to taking a picture.

–Video Mode toggles between video and camera modes.

–Brightness allows you to adjust the brightness of the image in the home screen LCD.

–Camera Pictures displays all pictures taken and stored.

–Last Picture displays the most recently taken picture.

–Frames allows you to add a frame or a stamp to your picture. A frame or stamp cannot be removed once it has been used in a picture.

Note: The picture resolution changes to

160 x 120 while taking pictures with frames. The resolution returns to the original setting once Frames is disabled.

User Guide for the Kyocera Slider Remix KX5 Phone 27