Kyocera SE47 manual Putting music files onto the memory card, Using a Memory Card Reader

82-N8735-1.book Page 32 Thursday, October 27, 2005 12:37 PM

Putting music files onto the memory card

Music files can be put onto the memory card by either using an optional memory card reader for your computer or by using a KX5 USB cable and placing the KX5 into Mass Storage Mode.

Note: Use only a previously formatted memory card when loading music files.

Using a Memory Card Reader

1.Connect the memory card reader to your computer.

2.Insert the memory card into the memory card reader. Locate the Removable Disk drive on your computer.

4.Place music files into the “MUSIC” folder located on the memory card.

Note: Music files must be placed in the MUSIC folder in order to work properly.

Using a KX5 USB cable

1.Load the USB Drivers CD onto your computer and follow the on-screen prompts. (This is only required during the initial set-up).

2.Plug the USB cable into bottom of the KX5.

3.Plug the USB cable into a USB port on your computer.

4.On the phone select Menu → Settings → USB Storage → Enabled.

	5.	Your KX5 phone will now be “viewed” by your
		computer as a “Mass Storage Device.”
3. Locate the music files to be placed onto the	6.	On your computer double click on
		“My Computer.”
memory card and “drag and drop” them to	7.	You will see the Transflash Card inserted in
the Removable Disk drive.		the KX5 as a Removable Disk drive.
Note: The KX5 supports the following music	8.	Double click on the appropriate Removable
file types: .mp3, .aac, .mp4, .3gp, .3g2, .m4a		Disk drive.
and .m4b.	9.	Double click on the MUSIC folder.
32			Using the Music Player