ZyXEL Communications Prestige 100WH Internet Access Router, DHCP Ethernet Setup Menu Fields

Prestige 100WH Internet Access Router

Follow the instructions in Table 3-1.on how to configure the DHCP fields.

Table 3-1.	DHCP Ethernet Setup Menu Fields
Field		Description
DHCP		This field determines the mode of DHCP support. If set to [None],
		DHCP will not be used. If it is set to [Server], your Prestige will
		act as a DHCP server.
		The default in this field is [Server].
If DHCP=Server:		When DHCP is used, the following four items need to be set:
Client IP Pool Starting		The Client IP Pool Starting Address gives the first address in the
Address		pool.
		The default in this field is 192.168.1.33
Size of Client IP Pool		The count of the IP addresses in the pool.
		The default in this field is 32.
Primary and Secondary		Enter the IP address of the DNS server(s) provided by your ISP
DNS Server		or network administrator.

Table 3-2 contains instructions on how to configure your Prestige for TCP/IP Ethernet Setup.

Table 3-2.	TCP/IP Ethernet Setup Menu Fields
Field		Description
TCP/IP Setup
IP Address		Enter the IP address of your Prestige in dotted decimal notation.
		The default in this field is 192.168.1.1.
IP Subnet		Enter the subnet mask of your Prestige.
Mask		The default in this field is 255.255.255.0.
RIP		This parameter determines how your Prestige handles RIP traffic
Direction		(In/Out/both/none).
		The default in this field is [Both].
Version		Version of RIP packets sent by the Prestige. The default in this field is RIP-1.

When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.

3-6Chapter 3 Internet Access Application