ZyXEL Communications 100WH user manual 6Chapter 6 Dial-in Server Applications

Prestige 100WH Internet Access Router

Table 6-2.	Default Dial-in Setup Fields (continued)
Field		Description
Callback Budget		This field sets the budget callback time for all the dial-in users. The
Management: Allocated		default for this field is [0] for unlimited budget.
Budget (min)
Callback Budget		This field sets the time interval to reset the above callback budget
Management: Period		control.
(hr)
Dial-In IP Address		If set to [Yes], it tells your Prestige to allow a remote host to specify its
Supplied By: Dial-in		own IP address.
User		If set to [No], the remote host must use the IP address assigned by your
		Prestige from the IP pool, configured below. This is to prevent the
		remote host from using an invalid IP address and potentially disrupting
		the whole network.
Dial-In IP Address		This field tells your Prestige to provide the remote host with an IP
Supplied By: IP Pool		address from the pool. This field is required if Dial-In IP Address
		Supplied By: Dial-in User is set to [No]. You can configure this field even
		if Dial-in User is set to [Yes], in which case your Prestige will accept the
		IP address if the remote peer specifies one; otherwise, an IP address is
		assigned from the pool.
IP Pool: IP Start Addr		This field is active only if you selected [Yes] in the Dial-In IP Address
		Supplied By: IP Pool field.
		The IP pool contains contiguous IP addresses and this field specifies
		the first one in the pool.

6-6Chapter 6 Dial-in Server Applications