Prestige 100WH Internet Access Router

Table 6-2 describes and contains information on how to configure each parameter in Menu 13 - Default Dial-in Setup.

Table 6-2.

Default Dial-in Setup Fields

 

 

 

Field

 

Description

 

 

Telco Options: CLID

This field sets the CLID (Calling Line ID) authentication parameter for all

Authen

 

incoming calls. There are three options for this field:

 

 

• None - No CLID is required.

 

 

• Required – CLID MUST be available, or the Prestige will not answer

 

 

the call.

 

 

• Preferred - If the CLID is available then CLID will be used for

 

 

authentication. If the CLID is not available, authentication is done in

 

 

PPP negotiation.

 

 

PPP Options: Recv.

This field sets the authentication protocol used for incoming calls. User

Authen

 

names and passwords are configured in the next section (Dial-in Users

 

 

Setup). Options for this field are:

 

 

• CHAP/PAP - Your Prestige will try CHAP first, but PAP will be used if

 

 

CHAP is not available.

 

 

• CHAP - Use CHAP only.

 

 

• PAP - Use PAP only.

 

 

• None - Your Prestige will try CHAP first, but no authentication is

 

 

required if CHAP is not available.

 

 

PPP Options: Mutual

Some vendors (for example, Cisco) implement mutual authentication.

Authen

 

That is, the node that initiates the call will request a user name and

 

 

password from the far end that they are dialing to. If the remote node that

 

 

is dialing in implements this type of authentication, set this field to Yes.

 

 

 

PAP Login

 

This field will only be enabled if the Mutual Authen. Field is [Yes]. Enter in

 

 

the PAP login name for this Prestige. This field does not apply to CHAP

 

 

authentication.

 

 

 

PAP Password

 

This field will only be enabled if the Mutual Authen is [Yes]. Enter the PAP

 

 

password for this Prestige. This field does not apply to CHAP

 

 

authentication.

 

 

 

Chapter 6 Dial-in Server Applications

6-5

Page 81
Image 81
ZyXEL Communications 100WH user manual Default Dial-in Setup Fields, Field Description