ZyXEL Communications Prestige 100WH Internet Access Router, Edit IP Static Route Menu Fields

Prestige 100WH Internet Access Router

Table 5-2 describes the fields for Menu 12.1 - Edit IP Static Route Setup.

Table 5-2.	Edit IP Static Route Menu Fields
Field		Description
Route Name		Enter a descriptive name for this route. This is for identification purpose
		only.
Active		This field allows you to activate/deactivate this static route.
Destination IP Address		This parameter specifies the IP address of the remote network.
IP Subnet Mask		Enter the subnet mask for this destination. Follow the discussion on IP
		subnet mask in this chapter. If you need to specify a route to a single hose,
		use a subnet mask of 255.255.255.255 in this field.
Gateway IP Address		Enter the IP address of the gateway. The gateway is an immediate
		neighbor of your Prestige that will forward the packet to the destination. On
		the LAN, the gateway must be a router on the same segment as your
		Prestige; over WAN, the gateway must be the IP address of one of the
		Remote nodes.
Metric		Same meaning as those in the Remote node Setup (See Table 5-1).
Private		Same meaning as those in the Remote node Setup (See Table 5-1).

Once you have completed filling in this menu, press [Enter] at the message [Press ENTER to Confirm...] to save your configuration, or press [Esc] at any time to cancel.

5-8Chapter 5 Remote Node TCP/IP Configuration