ZyXEL Communications 100WH user manual Default Dial-In Setup, 3. Menu 13 - Default Dial-in Setup

Prestige 100WH Internet Access Router

6.3Default Dial-In Setup

This section covers the default dial-in parameters. The parameters in Menu 13 affect incoming calls from all remote dial-in users and remote nodes until authentication is completed. Once authentication is completed, and if it matches a remote node, your Prestige will use parameters from that particular remote node.

Menu 13 - Default Dial-in Setup
Telco Options:	IP Address Supplied By:
CLID Authen= None	Dial-in User= Yes
	IP Pool= No
PPP Options:	IP Start Addr= N/A
Recv Authen= CHAP/PAP
Compression= Yes	Session Options:
Mutual Authen= No	Input Filter Sets=
PAP Login= N/A	Output Filter Sets=
PAP Password= N/A	Idle Timeout= 300

Callback Budget Management:

Allocated Budget(min)=

Period(hr)=

Press ENTER to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 6-3. Menu 13 - Default Dial-in Setup

From the Main Menu, enter 13 to go to Menu 13 - Default Dial-in Setup. This section will describe how to configure the protocol-independent fields in this menu. For the protocol- dependent fields, refer to the appropriate chapters.

6-4Chapter 6 Dial-in Server Applications