Prestige 100WH Internet Access Router
The following Table describes the eight diagnostic test options available in Menu 24.4.
Table | System Maintenance Menu Diagnostic Test Options | |
|
|
|
Fields |
| Description |
|
|
|
Drop WAN Port |
| This command will drop the current call. |
|
|
|
Reset WAN Port |
| This command will reset the WAN Port. |
|
| |
Redirect to WAN Port | This command will redirect the keyboard to the WAN Port. Anything you type | |
|
| will be sent to the WAN device and the device’s response will be shown on |
|
| your terminal. |
|
| |
Internet Setup Test | This test checks to see if your Internet access configuration is correct. When | |
|
| this option is chosen, your Prestige will call the ISP and perform the PPP |
|
| negotiations. If everything is working properly, you will receive an appropriate |
|
| response. Otherwise, note the error message and consult your network |
|
| administrator. |
|
|
|
Ping Host |
| This diagnostic sends an ICMP echo packet to the remote host and shows |
|
| you the |
|
| host is reachable via TCP/IP. |
|
|
|
Reboot System |
| This option reboots the system. |
|
|
|
Command Mode |
| This option allows you to enter the command mode. This mode allows you to |
|
| diagnose and test your Prestige using a specified set of commands. |
|
|
|
Manual Call |
| This option allows you to manually place a call to a remote node. The Prestige |
|
| will show you traces of what is happening during the call setup and PPP |
|
| negotiation. |
|
|
|
