Manuals / Husqvarna / Household Appliance / Sewing Machine

Husqvarna 970 Maintenance, Check the engine’s oil level, Check the engine’s cooling air intake

Models: 970

1 36

Download 36 pages 63.29 Kb

Page 23

MAINTENANCE

MAINTENANCE	E
Check the engine’s oil level
Check the oil level in the engine when the machine
is horizontal.
Dismantle the engine hood as per the description
on page 20.
Release the dip stick and pull out. Wipe off the oil
and insert again.
The dip stick must be fully screwed down.
Now release the dip stick again and pull out. Check
the oil level.

The oil level should lie between the markings on the dip stick. If the level approaches the ADD mark, top up with oil to the FULL mark.

The oil is filled in the same hole as the dip stick is in.

Use engine oil SAE 30 or SAE 10W-30.

The total oil volume in the engine is 1.2 litres.

	ADD	FULL
ADD	FULL

Check the engine’s cooling air intake

Dismantle the engine hood as described on page 20.

Check that the cooling intake is free from leaves, grass and dirt.

If the cooling intake is blocked this will interfere with the cooling of the engine, which can damage the engine.

Checking of the fuel pump’s air filter

Check regularly that the fuel pump’s air filter is free from dirt.

The filter can when necessary be cleaned with a brush.

English – 21

Image 23

Husqvarna 970, 850 manual Maintenance, Check the engine’s oil level, Check the engine’s cooling air intake

Contents

R I D E R 101Rider 850/970 Operator´s manualPage CONTENTSE Operator’s Manual for Rider 850 Rider II. Slope operation SAFETY INSTRUCTIONSSafe operation practices for ride-on mowers I. General operationDanger, keep hands and feet away IV. ServiceWheel assembly USA Part PackageEXPLANATION OF SYMBOLS Never carry passengers General useRead the instructions before starting the machine Clear the area from stones etc. before cuttingSAFETY INSTRUCTIONS Be extra careful when driving on slopesDriving on slopes Cut slopes upwards and downwards, not sidewaysNever allow children to drive the machine MaintenanceChildren Keep children away from the mowing areaSAFETY INSTRUCTIONS Never smoke in the vicinity of the battery or the fuelClean the machine regularly from grass, leaves and other waste Never drive the machine in an enclosed spaceLocation of the controls PRESENTATIONEPresentation Brake pedal EPRESENTATIONThrottle and Choke lever Clutch pedalPRESENTATIONE Parking brakeGear shift Cutting unitLowering of the cutting unit cutting position Lever for adjustment of cutting heightLift lever for cutting unit Lifting of the cutting unit transport positionFuelling PRESENTATIONSeat Starting the engine DRIVINGBefore starting 4. Push the throttle control to position 3 choke DRIVINGDRIVING Driving the machineDRIVING Cutting tipsMowing pattern DRIVING Starting on slopesStopping the engine Maintenance schedule MAINTENANCEEDismantling of the machine hoods EMAINTENANCEChecking of the fuel pump’s air filter MAINTENANCECheck the engine’s oil level Check the engine’s cooling air intakeEMAINTENANCE Checking and adjustment of the steering wiresChecking the brake Adjusting the brakeCheck the level of the battery acid Check the safety systemEMAINTENANCE Replacing the air filterMAINTENANCE Checking and adjustment of the cuttingunit’s ground pressure Rider Checking the cutting unit’s parallelism26 - English Adjustment of the cutting unit’s parallelismEMAINTENANCE MAINTENANCE Dismantling the cutting unitEMAINTENANCE Checking the bladesChecking the tyre pressure Cutting unit on Rider 850 rear ejectionMAINTENANCE Changing the oilLubrication 4. Fit the drain plug and tighten30 - English Checking and adjustment of the throttle wireReplacement of the fuel filter EMAINTENANCEProcedure TROUBLE SHOOTING SCHEDULEProblem Winter storage Service«*2T6B¬ ESTORAGETECHNICAL DATA «*2T6B¬