Manuals / Husqvarna / Household Appliance / Sewing Machine

Husqvarna 970, 850 manual Presentatione, Location of the controls

Models: 970

1 36

Download 36 pages 63.29 Kb

Page 11

Image 11

PRESENTATIONE

Presentation

These instructions describe two machine models, Rider 850 and Rider 970.

Both models are fitted with engines from Briggs & Stratton of 10.5, 12.5 and 15.5 hp.

The machines have gearboxes of the in-line type, with 5 forward gears and one reverse gear, which enables selection of the best speed for mowing and transport.

RID
E R
8 5 0
	ER	85	0
RID		85

Rider 850 has a cutting unit which throws out the grass at the rear and a cutting width of 850 mm.

R I

D E R

9 7 0

Rider 970 is available with three different cutting units: unit with rear ejection or side ejection with a cutting width of 965 mm, and a Bioclip unit with a cutting width of 1030 mm.

6	7	4	3	5	2	1
8	9			10		11

Location of the controls

1.Ignition lock

2.Throttle/Choke lever

3.Adjustment of cutting height

4.Lifting lever, cutting unit

5.Gear shift

6.Brake pedal

7.Lock button for parking brake

8.Clutch pedal

9.Adjustment of seat

10.Fuel tank cap

11.Main lock (under seat)

English – 9

Page 11

Image 11

Husqvarna 970, 850 manual Presentatione, Location of the controls

Contents

R I D E R 101Rider 850/970 Operator´s manualPage CONTENTSE Operator’s Manual for Rider 850 Rider II. Slope operation SAFETY INSTRUCTIONSSafe operation practices for ride-on mowers I. General operationDanger, keep hands and feet away IV. ServiceWheel assembly USA Part PackageEXPLANATION OF SYMBOLS Never carry passengers General useRead the instructions before starting the machine Clear the area from stones etc. before cuttingSAFETY INSTRUCTIONS Be extra careful when driving on slopesDriving on slopes Cut slopes upwards and downwards, not sidewaysNever allow children to drive the machine MaintenanceChildren Keep children away from the mowing areaSAFETY INSTRUCTIONS Never smoke in the vicinity of the battery or the fuelClean the machine regularly from grass, leaves and other waste Never drive the machine in an enclosed spaceLocation of the controls PRESENTATIONEPresentation Brake pedal EPRESENTATIONThrottle and Choke lever Clutch pedalPRESENTATIONE Parking brakeGear shift Cutting unitLowering of the cutting unit cutting position Lever for adjustment of cutting heightLift lever for cutting unit Lifting of the cutting unit transport positionFuelling PRESENTATIONSeat Starting the engine DRIVINGBefore starting 4. Push the throttle control to position 3 choke DRIVINGDRIVING Driving the machineDRIVING Cutting tipsMowing pattern DRIVING Starting on slopesStopping the engine Maintenance schedule MAINTENANCEEDismantling of the machine hoods EMAINTENANCEChecking of the fuel pump’s air filter MAINTENANCECheck the engine’s oil level Check the engine’s cooling air intakeEMAINTENANCE Checking and adjustment of the steering wiresChecking the brake Adjusting the brakeCheck the level of the battery acid Check the safety systemEMAINTENANCE Replacing the air filterMAINTENANCE Checking and adjustment of the cuttingunit’s ground pressure Rider Checking the cutting unit’s parallelism26 - English Adjustment of the cutting unit’s parallelismEMAINTENANCE MAINTENANCE Dismantling the cutting unitEMAINTENANCE Checking the bladesChecking the tyre pressure Cutting unit on Rider 850 rear ejectionMAINTENANCE Changing the oilLubrication 4. Fit the drain plug and tighten30 - English Checking and adjustment of the throttle wireReplacement of the fuel filter EMAINTENANCEProcedure TROUBLE SHOOTING SCHEDULEProblem Winter storage Service«*2T6B¬ ESTORAGETECHNICAL DATA «*2T6B¬