MAINTENANCE | E |
Checking the brake |
|
The brake is of the disc brake type and is fitted on |
|
the gearbox. |
|
Check that the brake is correctly adjusted by meas- |
|
uring the distance between the brake lever and the |
|
front edge of the recess on the chassis. |
|
The distance should be |
|
not applied. |
|
Adjusting the brake
1.Release the lock nuts (1).
2.Tension the wire with the adjusting screw (2) so that the distance between the brake lever and the front edge of the recess on the chassis is 1 mm.
3.Tighten the lock nuts (1) after adjustment.
!WARNING!
Poorly adjusted brakes can result in reduced braking power.
2 | 1 |
1 |
Check the level of the battery acid
Check that the level of the battery acid lies between the markings. Top up the cells with distilled water only.
!
External:
Internal:
WARNING!
Procedures on contact with acid
Rinse well with plenty of water.
Drink large quantities of water or milk. Contact a doctor as soon as possible.
Eyes: Rinse well with plenty of water. Con- tact a doctor as soon as possible.
Batteries emit explosive gas. Sparks, flames and cigarettes must absolutely not be brought into the vicinity of the battery.
Check the safety system
The machine is equipped with a safety system which prevents starting the cutting unit or driving the machine unless someone is sitting in the seat. Check daily the safety system functions.
English – 23
