Manuals / Husqvarna / Household Appliance / Sewing Machine

Husqvarna 970, 850 manual Presentation, Seat, Fuelling

Models: 970

1 36

Page 15

PRESENTATION	E
Seat
The seat has a jointed attachment on the front
edge and can be tipped forward.
The seat can also be adjusted lengthways.
Release the wheels under the seat and adjust it
forwards or backwards to the required position.
Lock the adjustment with the wheels.

Fuelling

The engine should be run on at least 92 octane leaded or unleaded petrol/gasoline (not oil mixed). For USA and Canada at least 87 octane leaded or unleaded petrol/gasoline (not oil mixed).

!WARNING!

Petrol/gasoline is highly inflammable. Observe care and refuel outdoors (see safety instructions).

English – 13

Page 15

Image 15

Husqvarna 970, 850 manual Presentation, Seat, Fuelling

Contents

R I D E R 101Rider 850/970 Operator´s manualPage CONTENTSE Operator’s Manual for Rider 850 Rider II. Slope operation SAFETY INSTRUCTIONSSafe operation practices for ride-on mowers I. General operationDanger, keep hands and feet away IV. ServiceWheel assembly USA Part PackageEXPLANATION OF SYMBOLS Never carry passengers General useRead the instructions before starting the machine Clear the area from stones etc. before cuttingSAFETY INSTRUCTIONS Be extra careful when driving on slopesDriving on slopes Cut slopes upwards and downwards, not sidewaysNever allow children to drive the machine MaintenanceChildren Keep children away from the mowing areaSAFETY INSTRUCTIONS Never smoke in the vicinity of the battery or the fuelClean the machine regularly from grass, leaves and other waste Never drive the machine in an enclosed spacePRESENTATIONE PresentationLocation of the controls Brake pedal EPRESENTATIONThrottle and Choke lever Clutch pedalPRESENTATIONE Parking brakeGear shift Cutting unitLowering of the cutting unit cutting position Lever for adjustment of cutting heightLift lever for cutting unit Lifting of the cutting unit transport positionPRESENTATION SeatFuelling DRIVING Before startingStarting the engine 4. Push the throttle control to position 3 choke DRIVINGDRIVING Driving the machineCutting tips Mowing patternDRIVING Starting on slopes Stopping the engineDRIVING Maintenance schedule MAINTENANCEEDismantling of the machine hoods EMAINTENANCEChecking of the fuel pump’s air filter MAINTENANCECheck the engine’s oil level Check the engine’s cooling air intakeEMAINTENANCE Checking and adjustment of the steering wiresChecking the brake Adjusting the brakeCheck the level of the battery acid Check the safety systemEMAINTENANCE Replacing the air filterMAINTENANCE Checking and adjustment of the cuttingunit’s ground pressure Rider Checking the cutting unit’s parallelismAdjustment of the cutting unit’s parallelism EMAINTENANCE26 - English MAINTENANCE Dismantling the cutting unitEMAINTENANCE Checking the bladesChecking the tyre pressure Cutting unit on Rider 850 rear ejectionMAINTENANCE Changing the oilLubrication 4. Fit the drain plug and tighten30 - English Checking and adjustment of the throttle wireReplacement of the fuel filter EMAINTENANCETROUBLE SHOOTING SCHEDULE ProblemProcedure Winter storage Service«*2T6B¬ ESTORAGETECHNICAL DATA «*2T6B¬