8) Finding a Lost Handset
To locate a lost handset, press [find] on the base. The handsets will beep for sixty seconds. To cancel paging, press [find] again or press any key on the found handset.
9) Maintenance
Specifications
The phone complies with FCC Parts 15 and 68.
Operating |
| |||
temperature |
| |||
|
|
| ||
|
| For the base | For the charger | |
| Part number | |||
AC Adapter | ||||
|
| |||
| Input Voltage | 120V AC 60Hz | 120V AC 60Hz | |
| Output Voltage | 9V DC 210mA | 9V DC 210mA | |
Battery | Part number |
| ||
Capacity | 500mAh, 3.6V |
| ||
|
| |||
Frequency | 924.516925 - 926.704425 MHz |
| ||
2,405.155942 - 2,411.718441 MHz |
| |||
|
| |||
Note: To avoid damage to the phone use only Uniden
Specifications, features, and availability of optional accessories are all subject to change without prior notice.
Power Failure
During the period that the power is off, you will not be able to make or receive calls with the telephone.
Battery Life
With average use, your handset battery provides approximately six hours of talk time and approximately seven days of standby time. You can achieve optimum battery life and performance by returning the handset to the base or charger cradle after each use. When your handset is left off of the cradle, the battery will gradually discharge even if the handset is not being used. The actual talk time duration will be reduced in proportion to the amount of time the handset is off of the cradle.
Low Battery Alert
When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, LOW BATTERY appears
on the LCD and none of the keys will operate. During a call, LOW BATTERY flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the cradle for charging.
Note: Information stored in the phone's memory will be retained for thirty minutes after the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, and the CID list.
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the cradle after a telephone call.
Battery Replacement and Handling
Recharge your phone on a regular basis by returning the handset to either cradle after each phone call. When the operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. To order replacement batteries, please contact Uniden’s Parts Department. The contact information is listed on the back cover page.
Warning:
To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product.
Caution:
•Use only the specified Uniden battery pack
•Do not remove the battery from the handset to charge it.
•Never throw the battery into a fire, disassemble it, or heat it.
•Do not remove or damage the battery casing.
Cleaning the Battery Charging Contacts
To maintain a good charge, clean the charging contacts on the handset once a month. Dampen a cloth with plain water.
Gently rub the damp cloth over the charging contacts until all visible dirt is removed. Dry the contacts thoroughly before returning the handset to the cradle.
Caution:Contacts
Do not use paint thinner, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.
