Hamilton Beach 840135100 manual Cleaning, Storage and Maintenance

840135100 Ev03.qxd 2/9/05 10:00 AM Page 11

Cleaning, Storage and Maintenance

1.Wash bowl, cover, blade, discs, removable drive sleeve, food gate, and food pusher in hot, soapy water. Rinse and dry thoroughly. See page 5 for information on how to remove food chute lid for cleaning.

NOTE: Do not store unit with cover in locked position; this may put strain on interlock tab.

2.Wipe base, control panel, and cord with a damp cloth or sponge.

To remove stubborn soil, use a mild non-abrasive cleanser.

NEVER IMMERSE THE BASE IN WATER OR OTHER LIQUID.

3.To store, place bowl on base. Then place Chopping/Mixing Blade on motor shaft and Slicing/Shredding Disc on Chopping/Mixing Blade. The Removable Drive Sleeve may be stored in the bowl. Place cover on bowl but do not lock.

4.Monthly place a drop of vegetable oil on each screw in the food chute.

How to Release Suction Cup Feet After Use

The suction cup feet on the bottom of your Big Mouth™ Food Processor are designed to keep the unit stationary during use. To maximize the life of your Big Mouth™ please review the following directions:

With Big Mouth™ fully assembled: lift it from counter by

placing hands

under unit as

shown and lifting to one side.

OR

With Big Mouth™ fully assembled: lift it from counter by

grabbing the han- dle as shown and lifting from same

side as handle.

OR

With bowl and lid removed from Big Mouth™: lift it

from counter by

placing hands

under unit as

shown and lifting to one side

11