Parts of the Base
in use/
(in use/charge) LED /
Voice mail waiting indicator (flashing)
DC IN 9V jack TEL LINE jack
[find]
Charging contacts
Parts of the Charger
DC IN 9V
jack
Charging contacts
(charge)
LED
3) Installing the Phone
Choosing the Best Location
Before choosing a location for your new phone, here are some important guidelines you should consider:
Avoid heat sources, such as radiators, air ducts, and sunlight
Avoid noise sources such as a window by a street with heavy traffic
Avoid television sets and other electronic equipment
Choose a central location
Avoid microwave ovens
Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock
Avoid
personal computers
Avoid other cordless telephones
•Choose a location close to both a phone jack and a continuous power outlet (one which is not connected to a switch).
•Keep the base and handsets away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting.
•For better reception, place the base as high as possible. You can place the base on a desk or table top or mount it on the wall.
•Place the base in an open area for optimum range and reception.
•If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does not disable your alarm equipment. If you have questions about what will disable your alarm equipment, contact your telephone company or a qualified installer.
Installing the Battery
Note: Use only the Uniden
1 Remove the cover. | 2 Connect the battery pack |
| with the correct polarity. |
Press down
Use the finger indention for a better grip
Red |
| Red Black |
| Wire Wire | |
| Black | |
|
| |
Slide the cover |
|
|
downward |
|
|
| The connector notches | |
| fit only one way. | |
3Replace the cover.
Click | Listen for |
| a click to |
| ensure |
| connection. |
Slide upwards
