ZyXEL Communications 100WH user manual Between Yes and No. See Internet Access Application for

Prestige 100WH Internet Access Router

Table 5-1.	Remote Node Network Layer Options for a TCP/IP Configuration
Field		Description
Rem IP Address		This will show the IP address you entered for this remote node in the
		previous menu.
Rem IP Subnet		Enter the subnet mask for the remote network.
Mask
My WAN Addr		Some implementations, especially the UNIX derivatives, require hosts on
		both ends of the link to have separate addresses from the LAN, and that the
		addresses must have the same network number. If this is the case, enter
		the IP address assigned to the WAN port of your Prestige.
		Note that this is the address assigned to your local Prestige, not the remote
		router. Please see Figure 5-3 for an explanation of My WAN Addr. With
		Sample IP Addresses.
Single User		This field should be set to [Yes] to enable the Single User Account (Network
Account		Address Translation) feature for this site. Use the space bar to toggle
		between [Yes] and [No]. See Chapter 3 - Internet Access Application for
		more information on the Single User Account feature.
Server IP address		If you are using the Single User Account feature and you want to make a
		server on your LAN (for example, a Web server) accessible to outside
		users, enter that servers IP address here.
Metric		The metric represents the “cost” of transmission for routing purposes. IP
		routing uses hop count as the measurement of cost, with a minimum of [1]
		for directly connected networks. Enter a number that approximates the cost
		for this link. The number need not be precise, but it must be between [1]
		and [16]. In practice, [2] or [3] is usually a good number.
Private		This parameter determines if the Prestige will include the route to this
		remote node in its RIP broadcasts. If set to [Yes], this route is kept private
		and not included in RIP broadcast. If [No], the route to this remote node will
		be propagated to other hosts through RIP broadcasts.

5-4Chapter 5 Remote Node TCP/IP Configuration