Prestige 100WH Internet Access Router
Chapter 4
Remote Node Configuration
A remote node is required for placing calls to a remote gateway. A remote node represents both a remote gateway and the network behind it, across a WAN connection. Please note that when you use Menu 4 to configure the Internet access, you are actually configuring one of the four remote nodes available in your Prestige. Once a remote node is configured properly, traffic to the remote network will trigger your Prestige to make a call automatically (i.e., Dial On Demand).
4.1Remote Node Setup
This section describes the configuration of
4.1.1Remote Node Profile
To configure the remote node parameters, follow these steps:
Step 1. From the Main Menu, select menu option [11. Remote Node Setup]
Step 2. When Menu 11 appears, as shown in Figure
Figure 4-1. Menu 11 - Remote Node Setup
Menu 11. - Remote Node Setup
1.________
2.________
3.________
4.________
Enter Node # to Edit:
Chapter 4 Remote Node Configuration |
