Prestige 100WH Internet Access Router

4.1.2Editing PPP Options

To edit the remote node PPP Options, move the cursor to the [Edit PPP Options] field in Menu 11.1 - Remote Node Profile, and use the space bar to toggle and select [Yes], then press [Enter]. Menu 11.2 appears as shown in Figure 4-3.

Menu 11.2 - Remote Node PPP Options

Encapsulation= Standard PPP

Compression= No

Press ENTER to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 4-3. Menu 11.2 - Remote Node PPP Options

Table 4-2 describes the Remote Node PPP Options Menu, and contains instructions on how to configure the PPP options fields.

Table 4-2. Remote Node PPP Options Menu Fields

Field

Description

 

 

Encapsulation

Select the vendor-specific encapsulation for the link. There are

 

two options in this field.

 

Standard PPP - Standard PPP options will be used.

 

CISCO PPP - Cisco PPP will be used.

Compression

Turn on the Stac Compression. The default for this field is [Off].

Once you have completed filling in Menu 11.2 - Remote Node PPP Options, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.

Chapter 4 Remote Node Configuration

4-7

Page 67
Image 67
ZyXEL Communications 100WH user manual Editing PPP Options, Remote Node PPP Options Menu Fields Description