|
|
| Prestige 100WH Internet Access Router | |
| Table | |||
| Table | WAN Port Setup Menu Fields | ||
|
|
|
|
|
| Field |
| Description |
|
|
|
|
|
|
| Modem Name |
| Enter a descriptive name for the WAN device on the WAN Port. |
|
|
|
|
|
|
| Active |
| Set to [Yes] to activate the WAN port. |
|
|
|
|
|
|
| Call Direction |
| Set the call direction for the WAN device. |
|
|
|
|
|
|
| Phone Number |
| Enter the telephone number assigned to your line by your telephone |
|
|
|
| company. Note that your Prestige only accepts digits; do not include |
|
|
|
| dashes and spaces in this field. |
|
|
|
|
|
|
| Port Speed |
| Press the space bar to select the speed of the |
|
|
|
| Prestige and the WAN device. The speed should be close to 4 times the |
|
|
|
| speed of the WAN device. For example, 230400. |
|
|
|
|
|
|
| AT Command |
| Enter the AT commands to initialize the WAN device at Prestige start up. |
|
| String: Init |
| The string is sent to the WAN device again whenever it is modified. For |
|
|
|
| example, [at&fs0=0w2s95=1]. |
|
|
|
|
|
|
| Advanced Setup |
| To edit the Advanced Setup for this internal modem, move the cursor to |
|
|
|
| this field, use the space bar to select [Yes] and press [Enter]. This will bring |
|
|
|
| you to Menu 2.1.1 - Advanced WAN Setup. |
|
|
|
|
|
|
The default initialization string tells a modem to load factory default (&f), not to answer any incoming call (s0=0), and to report line speed (w2) and in “CONNECT speed” format (s95=1). If you have an ISDN TA, please consult its documentation.
Chapter 2 Hardware Installation & Initial Setup |
