HP Enterprise File Services WAN Accelerator manual Additional Wccp Features, Security, For Wccp

To configure the client- side HP EFS WAN Accelerator

interface Vlan63

ip address 172.20.240.18 255.255.255.252 no ip redirects

ip wccp 91 redirect in no mls ip

no mls ipx

no cdp enable

!

ip classless

ip route 10.11.21.0 0.0.0.255 172.20.240.17 ip route 10.11.22.0 0.0.0.255 172.20.240.17 ip flow-export version 5

no ip http server

!

line con 0 exec-timeout 0 0

line vty 0 4

password 7 06541B2E5C175958 login

!

end

• At the system prompt, enter the following set of commands:

client-SH > enable client-SH # configure terminal

client-SH (config) # interface in-path ip address 10.11.22.46 /16 client-SH (config) # in-path oop enable

client-SH (config) # in-path enable client-SH (config) # wccp enable

client-SH (config) # wccp service-group 90 routers 10.11.22.17 flags,dst-ip-hash priority 200 weight 3 encap_scheme either client-SH (config) # write memory

client-SH (config) # restart

7 - WCCP DEPLOYMENTS

To configure the server-side HP EFS WAN Accelerator

At the system prompt, enter the following set of commands:

server-SH > enable server-SH # configure terminal

server-SH (config) # interface in-path ip address 10.11.24.200 /16 server-SH (config) # in-path oop enable

server-SH (config) # in-path enable server-SH (config) # wccp enable

server-SH (config) # wccp service-group 91 routers 10.11.24.250 flags,dst-ip-hash priority 200 weight 6 encap_scheme either server-SH (config) # write memory

server-SH (config) # restart

Additional WCCP Features

This section describes the additional features for WCCP.

Security	WCCP protocol messages can be authenticated between the router and the HP EFS
	WAN Accelerator using a password. The maximum password length is 8 characters.
To set the password	1. On the router, at the system prompt, enter the following command:
for WCCP
HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.5 DEPLOYMENT GUIDE		79