HP Enterprise File Services WAN Accelerator manual In-Path Deployments

CHAPTER 2 In-Path Deployments

In This Chapter	This chapter describes physical in-path network deployments and summarizes the
	basic steps for configuring them. This chapter includes the following sections:
	‹ “Introduction to Physical In-Path Deployments,” next
	‹ “In-Path, Failover Support Deployment” on page 18
	‹ “In-Path, Two Routing Points Deployment” on page 20
	‹ “In-Path,Server-Side Deployment” on page 21
	‹ “In-Path,Server-Side, One to One Deployment” on page 22
	This chapter assumes that you are familiar with the HP EFS WAN Accelerator
	Management Console (Management Console). For detailed information about the
	Management Console and how to use it, see the HP Enterprise File Services WAN
	Accelerator Management Console User Guide.
	This chapter also assumes that you are familiar with the installation and configuration
	process for the HP EFS WAN Accelerator. For detailed information, see the HP
	StorageWorks Enterprise File Services WAN Accelerator Installation and
	Configuration Guide.
	This chapter provides the basic steps for physical in-path network deployments. It does
	not provide detailed procedures. Use this chapter as a general guide for these
	deployments. If you need additional assistance, contact HP technical support at http:/
	/www.hp.com.
	For detailed information about the factors you must consider before you deploy the HP
	EFS WAN Accelerator, see “Design and Deployment Overview” on page 11.

2 - IN-PATH DEPLOYMENTS

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.5 DEPLOYMENT GUIDE 17