HP Enterprise File Services WAN Accelerator manual Configuring PFS Using the Management Console

Configuring PFS Using the Management

Console

The following sections provide the basic steps for joining the domain for PFS, and configuring PFS shares for Broadcast, Local, or Stand-Alone mode using the Management Console.

To join a domain for	1.	Install and start the HP EFS RCU on the HP EFS RCU server, which by default
PFS		listens on port 8777. The RCU service must be started with a domain account that
		has write access to the share on the origin server.
	2.	Configure the HP EFS WAN Accelerator as an in-path device. For detailed
		information, see the HP StorageWorks Enterprise File Services WAN Accelerator
		Installation and Configuration Guide.

IMPORTANT: HP EFS RCU traffic from the HP EFS WAN Accelerator originates through the Primary Interface. To ensure proper optimization of HP EFS RCU traffic, make sure traffic from your Primary interface goes through the same switch as your LAN interface. For detailed information, see the HP StorageWorks Enterprise File Services WAN Accelerator Installation and Configuration Guide.

3.Connect to the Management Console. For detailed information, see the HP Enterprise File Services WAN Accelerator Management Console User Guide.

4.Navigate to the Setup: Proxy File Service (PFS) - Configuration page. You will need to join a domain the first time you configure PFS.

8 - PROXY FILE SERVICE DEPLOYMENTS

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.5 DEPLOYMENT GUIDE 89