HP Enterprise File Services WAN Accelerator manual Setup Optimization Service In-Path Rules

1.Configure the HP EFS WAN Accelerator as an in-path and out-of-path device. For detailed information, see the HP StorageWorks Enterprise File Services WAN Accelerator Installation and Configuration Guide.

2.Connect to the Management Console to verify your configuration. For detailed information, see the HP Enterprise File Services WAN Accelerator Management Console User Guide.

3.Navigate to the Setup: Optimization Service - In-Path Rules page in the Management Console.

Figure 4-7.Setup: Optimization Service - In-Path Rules Page

4.Define in-path, fixed-target rules for traffic you want to optimize. For example:

‹Select start, end, or a rule number from the Insert Rule At drop-down list to insert a rule in the Rules list. When you specify a particular rule number, the rule is placed after the rule number you specified and before the default auto- discover rule.

‹Type the IP address for the source subnet in the Source Subnet text box. Use the following format: 0.0.0.0/0.

36 4 - OUT-OF-PATH NETWORK DEPLOYMENTS